Summary for Test 2020-04-23-2-10

Test performed: CTM 202-November 2011

Project Information

Project IdentifiersProject ID: 212908
DEA: 07300404
EFIS: 0713000435
DIST-CO-RTE-PM07-LA-101-1.5/29.1
Award Date02/21/2018
Closeout DateNot set
Work DescriptionSLOPE PROTECTION AND BMP CONSTRUCTION.
Location DescriptionLOS ANGELES COUNTY IN LOS ANGELES AND NEAR CALABASAS FROM 0.1 MILE SOUTH OF ROUTE 101/110 SEPARATION TO 0.1 MILE NORTH OF MUREAU ROAD OVERCROSSING
QA Service Level1 (Verified on 05/09/2018)

Sample Information

Sample Taken Date04/23/2020 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/28/2020
Sample typeVerification A brief description of the sample3/4 HMA-A-SP R15 Aggregate and RAP
The quantity of what the sample constitutesPSUE 5 Bags From where was the sample collectedManufacturer
First name of sampler or witnessed byTuan A Last name of sampler or witnessed byNguyen
Title of sampler Telephone number of sampler
Laboratory sample identification0203A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameAll American Asphalt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-33-0005::ALL AMERICAN ASPHALT
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sampleUnknown
The plant number105793 A detailed description of where the material sample was collectedBelt Cut at All American Irwindale Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown JMF Verification ID

Test Details

DIME Sample ID: 2020-04-23-2
DIME Test ID: 2020-04-23-2-10
Testing Lab: CT - Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-05-07

Test Results


What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Input Type: Calculated
Tester's full name: Husni Ankir, Satish Jain, Michael Magana
Date of test: 04/29/2020
Cumulative percent passing the 3 in. sieve:100 %
Cumulative percent passing the 2 1/2 in. sieve:100 %
Cumulative percent passing the 2 in. sieve:100 %
Cumulative percent passing the 1 1/2 in. sieve:100 %
Cumulative percent passing the 1 in. sieve:100 %
Cumulative percent passing the 3/4 in. sieve:97 %
Cumulative percent passing the 1/2 in. sieve:85 %
Cumulative percent passing the 3/8 in. sieve:71 %
Cumulative percent passing the #4 sieve:47 %
Cumulative percent passing the #8 sieve:31 %
Cumulative percent passing the #16 sieve:22 %
Cumulative percent passing the #30 sieve:15 %
Cumulative percent passing the #50 sieve:10 %
Cumulative percent passing the #100 sieve:7 %
Cumulative percent passing the #200 sieve:4.5 %
General comments (publicly viewable) (Max 1000 characters): Combined RAP/Virgin Aggregate w/Correlation Factors Applied

Test was verified on 5/7/2020