Summary for Test 2020-04-24-2-4
Test performed: AASHTO T84-14Project Information
| Project Identifiers | Project ID: 209694 DEA: 080J0704 EFIS: 0800000282 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-215-0.6/1.7 |
| Award Date | 10/17/2017 |
| Closeout Date | 04/23/2020 |
| Work Description | (Alternative Delivery) The CMGC project will reconstruct and improve interchange of I-215 and Barton Road in the City of Grand Terrace, CA. |
| Location Description | Grade separation at Intersection of I-215 and Barton Road near Grand Terrace, CA. ? On I-215 between I-10 and SR-60. |
| QA Service Level | 1 (Verified on 12/11/2017) |
Sample Information
| Sample Taken Date | 04/24/2020 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/27/2020 |
| Sample type | Verification | A brief description of the sample | 3/4 HMA-A-SP R15 Aggregates and RAP |
| The quantity of what the sample constitutes | PSUE 6 Bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vulcan Corona | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0201A-20 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Corona | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0027, 91-33-0073 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 3/4 HMA-A-SP R15 | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | 224112 CORD SJR | A detailed description of where the material sample was collected | Belt Cut at Vulcan Corona Plant |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-04-24-2
DIME Test ID: 2020-04-24-2-4
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-05-06
Test Results
Input Type: Measured
Tester's full name: Danilo Ferrer
Date of test: 04/28/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 963.6 grams
Mass of the pycnometer with water (B): 654.3 grams
Mass of the oven dried sample (before pycnometer) (A): 489.6 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 0 grams
Mass of the oven dry aggregate (for absorption) (A): 489.6 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.567
Bulk specific gravity (SSD Basis): 2.622
Apparent specific gravity: 2.715
Absorption: 2.1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/6/2020 ✔