Summary for Test 2020-03-28-4-4

Test performed: AASHTO T84-14

Project Information

Project IdentifiersProject ID: 208973
DEA: 120H1004
EFIS: 1200000180
COOP: 120670
DIST-CO-RTE-PM12-ORA-405,73,405,605-9.3/24.3
Award Date11/07/2016
Closeout DateNot set
Work Description(Alternative Delivery) San Diego Freeway (I-405) Improvement Project SR-73 to I-605, Design Build Project, Administered by Orange County Transportation Authority, Caltrans METS to perform Source Inspection per RFP.
Location DescriptionOrange and Los Angeles Counties: 12-ORA-405 PM 9.3/24.2 / 07-LA-405 PM 0.0/1.2 12-ORA-22 PM R0.7/R3.8 / 12-ORA-22 PM R0.5/R0.7 12-ORA-73 PM R27.2/R27.8 / 12-ORA-605 PM 3.5/R1.6 07-LA-605 PM R0.0/R1.2
QA Service Level1 (Verified on 09/10/2015)

Sample Information

Sample Taken Date03/28/2020 Sample Unique Key4
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/24/2020
Sample typeVerification A brief description of the sample1/2 RHMA-G-SP Aggregate
The quantity of what the sample constitutesJMF 4 Bags From where was the sample collectedManufacturer
First name of sampler or witnessed byAll American Irvine Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0199G-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameAll American Asphalt Irvine Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-33-0005::ALL AMERICAN ASPHALT
The fabricator's/manufacturer's product name for the sample1/2 RHMA-G-SP The fabricator/manufacturer designation for the sampleUnknown
The plant number106836 A detailed description of where the material sample was collectedBelt Cut at All American Irvine Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2020-03-28-4
DIME Test ID: 2020-03-28-4-4
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-05-06

Test Results


Input Type: Measured
Tester's full name: Michael Magana
Date of test: 04/30/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 964.7 grams
Mass of the pycnometer with water (B): 653.5 grams
Mass of the oven dried sample (before pycnometer) (A): 490.5 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 490.5 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.598
Bulk specific gravity (SSD Basis): 2.648
Apparent specific gravity: 2.736
Absorption: 1.9 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/6/2020