Summary for Test 2020-04-14-10-5
Test performed: AASHTO T304-11Project Information
Project Identifiers | Project ID: 214587 DEA: 101J1604 EFIS: 1018000180 |
---|---|
DIST-CO-RTE-PM | 10-STA-132-27.9/41.0 |
Award Date | 03/02/2020 |
Closeout Date | 04/26/2021 |
Work Description | COLD PLANE AC PAVEMENT, RHMA OVERLAY AND SLURRY SEAL. |
Location Description | STANISLAUS COUNTY IN AND NEAR WATERFORD FROM G STREET TO 1.2 MILES EAST OF RUSHING ROAD |
QA Service Level | 1 (Verified on 01/24/2020) |
Sample Information
Sample Taken Date | 04/14/2020 | Sample Unique Key | 10 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 04/15/2020 |
Sample type | Verification | A brief description of the sample | Virgin aggregate for 3/4 Type A HMA mix |
The quantity of what the sample constitutes | Bags of Aggregate for JMF | From where was the sample collected | Source |
First name of sampler or witnessed by | J | Last name of sampler or witnessed by | Kort |
Title of sampler | Technician | Telephone number of sampler | |
Laboratory sample identification | 20-JMF-0044 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | George Reed Inc | Transportation Laboratory (TL) Number | C033877 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-55-0005::TABLE MOUNTAIN QUARRY |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-04-14-10
DIME Test ID: 2020-04-14-10-5
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)
Test Release Date: 2020-04-27
Test Results
What test method is performed?: Method A
Input Type: Measured
Tester's full name: Ryan Kester
Date of test: 04/22/2020
Mass of measure: 187.8 grams
Bulk dry specific gravity: 2.572
Mass of sample and measure #1: 330.6 grams
Mass of sample and measure #2: 330.5 grams
Volume of cylinder: 100.2 mL
Mass of sample #1: 142.8 grams
Mass of sample #2: 142.7 grams
Uncompacted voids #1: 44.6 %
Uncompacted voids #2: 44.6 %
Average uncompacted voids: 44.6 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/27/2020 ✔