Summary for Test 2020-03-02-11-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 66666 DEA: APP EFIS: 0019000052 |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Sample information for Aggregate Pre-approval Program (APP). Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 03/02/2020 | Sample Unique Key | 11 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/16/2020 |
| Sample type | Aggregate Prequalification Program | A brief description of the sample | State Spec Concrete Sand |
| The quantity of what the sample constitutes | production stockpile. | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Trenton | Last name of sampler or witnessed by | Crouse |
| Title of sampler | QC Supervisor | Telephone number of sampler | (209) 834-8316 |
| Laboratory sample identification | Linked DIME Sample ID | 2020-03-02-8 | |
| The fabricator/manufacturer/facility name | Teichert Materials Vernalis | Transportation Laboratory (TL) Number | 20-APPF-0039 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA or name of Pit) | 91-39-0041::VERNALIS WEST & EAST PROPERTIES |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Stockpile Loader Blend |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | fine |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | HMA Design ID |
Test Details
DIME Sample ID: 2020-03-02-11
DIME Test ID: 2020-03-02-11-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-04-17
Test Results
What size aggregate is being tested?: Fine Aggregate
Individual or cumulative mass retained on each sieve?: Individual Mass Retained
Input Type: Measured
Tester's full name: Bang Nguyen
Date of test: 03/19/2020
Individual mass retained on the 3/8 in. sieve: 0 grams
Individual mass retained on the #4 sieve: 0 grams
Individual mass retained on the #8 sieve: 200.4 grams
Individual mass retained on the #16 sieve: 354.5 grams
Individual mass retained on the #30 sieve: 261.3 grams
Individual mass retained on the #50 sieve: 214.9 grams
Individual mass retained on the #100 sieve: 127.2 grams
Individual mass retained on the #200 sieve: 38.2 grams
Individual mass retained on the pan: 13.8 grams
Total mass of sample tested: 1210 grams
Cumulative percent passing the 3/8 in. sieve:100 %
Cumulative percent passing the #4 sieve:100 %
Cumulative percent passing the #8 sieve:83 %
Cumulative percent passing the #16 sieve:54 %
Cumulative percent passing the #30 sieve:33 %
Cumulative percent passing the #50 sieve:15 %
Cumulative percent passing the #100 sieve:4 %
Cumulative percent passing the #200 sieve:1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/17/2020 ✔