DIME - Test Summary

Summary for Test 2014-07-30-5304342-1

Test performed: CTM 202-November 2011

Project Identifiers	Project ID: 7690 DEA: 080M94U4 EFIS: 0812000211
DIST-CO-RTE-PM	08-RIV,SBD-91,215-21.5/21.7,43.2/45.2,0.0/5.1
Award Date	12/03/2012
Closeout Date	03/25/2016
Work Description	CONST RETAINING WALLS, BRIDGES AND WIDEN ROADWAY WITH HMA
Location Description	RIVERSIDE AND SAN BERNARDINO COUNTIES ON ROUTE 91 FROM SPRUCE STREET TO 60/91/215 SEPARATION AND ON ROUTE 215 FROM 60/91/215 SEPARATION TO ORANGE SHOW ROAD
QA Service Level	1 (Verified on 10/15/2012)

Sample Taken Date	07/30/2014	Sample Unique Key	5304342
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	07/30/2014
Sample type	Acceptance	A brief description of the sample	Class 2 Aggregate Base
The quantity of what the sample constitutes	1 Bag	From where was the sample collected	Source
First name of sampler or witnessed by	Unknown	Last name of sampler or witnessed by	Saliba
Title of sampler	Unknown	Telephone number of sampler	Unknown
Laboratory sample identification	4206B	Linked DIME Sample ID	0
The fabricator/manufacturer/facility name	None	Transportation Laboratory (TL) Number	Unknown
Inspector Lot Number from the Transportation Laboratory (TL) Form	Unknown	Structure unique identifier	Not set
Structure name	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	Unknown
The fabricator's/manufacturer's product name for the sample	Unknown	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	Route 215 Median Sta 18 00
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size
The concrete mix design number		Lot number	Not set
Sublot number	Not set	Aggregate Mix Number	Not set

DIME Sample ID: 2014-07-30-5304342

DIME Test ID: 2014-07-30-5304342-1

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates

Test Release Date: 2015-02-20

What size aggregate is being tested?: Combined Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

For Combined Gradation only, has the fine aggregate sample been reduced?: No

For Combined Gradation only, use #40 Sieve?: No

Input Type: Calculated

Tester's full name: Nader Rashidi

Date of test: 08/01/2014

Cumulative percent passing the 3 in. sieve: 100 %

Cumulative percent passing the 2 1/2 in. sieve: 100 %

Cumulative percent passing the 2 in. sieve: 100 %

Cumulative percent passing the 1 1/2 in. sieve: 100 %

Cumulative percent passing the 1 in. sieve: 99 %

Cumulative percent passing the 3/4 in. sieve: 96 %

Cumulative percent passing the 1/2 in. sieve: 81 %

Cumulative percent passing the 3/8 in. sieve: 71 %

Cumulative percent passing the #4 sieve: 55 %

Cumulative percent passing the #8 sieve: 41 %

Cumulative percent passing the #16 sieve: 27 %

Cumulative percent passing the #30 sieve: 15 %

Cumulative percent passing the #50 sieve: 9 %

Cumulative percent passing the #100 sieve: 5 %

Cumulative percent passing the #200 sieve: 3.9 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 2/20/2015 ✔