Summary for Test 2020-03-23-3-1
Test performed: ASTM A370-15Project Information
| Project Identifiers | Project ID: 208973 DEA: 120H1004 EFIS: 1200000180 COOP: 120670 |
|---|---|
| DIST-CO-RTE-PM | 12-ORA-405,73,405,605-9.3/24.3 |
| Award Date | 11/07/2016 |
| Closeout Date | Not set |
| Work Description | (Alternative Delivery) San Diego Freeway (I-405) Improvement Project SR-73 to I-605, Design Build Project, Administered by Orange County Transportation Authority, Caltrans METS to perform Source Inspection per RFP. |
| Location Description | Orange and Los Angeles Counties: 12-ORA-405 PM 9.3/24.2 / 07-LA-405 PM 0.0/1.2 12-ORA-22 PM R0.7/R3.8 / 12-ORA-22 PM R0.5/R0.7 12-ORA-73 PM R27.2/R27.8 / 12-ORA-605 PM 3.5/R1.6 07-LA-605 PM R0.0/R1.2 |
| QA Service Level | 1 (Verified on 09/10/2015) |
Sample Information
| Sample Taken Date | 03/23/2020 | Sample Unique Key | 3 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/27/2020 |
| Sample type | Quality Assurance | A brief description of the sample | F1554 anchor rod |
| The quantity of what the sample constitutes | 1 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Jeri | Last name of sampler or witnessed by | Richardson |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | EDSCO Fasteners | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | 3089007 | Nut Mfg. Lot Number(s) | DEAN DCWD |
| Washer Mfg. Lot Number(s) | 317106 | Bolt Specification | F1554 GR55 |
| Bolt Length(s) | 56" | Nut Specification | A563 A194 |
| Washer Specification | F436 HDG | Finish | HDG and Plain |
| Diameter/Size | 2.25" | Bolt Mfg. Lot Number | |
| Rocap Test Requirement(s) | Lubricant Requirements(s) |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-03-23-3
DIME Test ID: 2020-03-23-3-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2020-04-02
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: spaine
Date of test: 04/02/2020
UTM: 67kip
Temperature: 72 f
| Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | 3089007 | 0.5 | 0.196 | 65300 | 90570 | 26.6 | spaine |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Bluehill Data Point FileTest graph for the Sample
Test was verified on 4/2/2020 ✔