Summary for Test 2014-08-28-12-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 209583 DEA: 07295004 EFIS: 0713000008 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-10-41.7/48.3 |
| Award Date | 07/07/2014 |
| Closeout Date | 03/21/2016 |
| Work Description | COLD PLANE AC PVMT AND PLACE RUBBERIZED HMA, SUPERPAVE. |
| Location Description | LOS ANGELES COUNTY IN POMONA, SAN DIMAS AND CLAREMONT FROM 0.7 MILE WEST OF ROUTE 10/57 SEPARATION TO SAN BERNARDINO COUNTY LINE |
| QA Service Level | 1 (Verified on 06/04/2014) |
Sample Information
| Sample Taken Date | 08/28/2014 | Sample Unique Key | 12 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/22/2014 |
| Sample type | Annual Source Testing | A brief description of the sample | One inch PCC Aggregates |
| The quantity of what the sample constitutes | 3 Bags | From where was the sample collected | Source |
| First name of sampler or witnessed by | Unknown | Last name of sampler or witnessed by | Unknown |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | 4270B | Linked DIME Sample ID | 0 |
| The fabricator/manufacturer/facility name | Cemex Azusa Quarry | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA or name of Pit) | SMARA 91 19 0007 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Stockpiles |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1 inch |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2014-08-28-12
DIME Test ID: 2014-08-28-12-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2015-02-20
Test Results
What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Nader Rashidi
Date of test: 09/25/2014
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 98 %
Cumulative percent passing the 3/4 in. sieve: 85 %
Cumulative percent passing the 1/2 in. sieve: 43 %
Cumulative percent passing the 3/8 in. sieve: 14 %
Cumulative percent passing the #4 sieve: 2 %
Cumulative percent passing the #8 sieve: 2 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/20/2015 ✔