Summary for Test 2019-10-16-15-1
Test performed: ASTM C136-06Project Information
| Project Identifiers | Project ID: 211260 DEA: 072159U4 EFIS: 0715000160 |
|---|---|
| DIST-CO-RTE-PM | 07-LA,ORA-5-0.0/1.5, 44.3/44.4 |
| Award Date | 05/27/2016 |
| Closeout Date | 08/01/2023 |
| Work Description | CONSTRUCT HOV LANES AND MIX FLOW LANES. |
| Location Description | LOS ANGELES AND ORANGE COUNTIES IN BUENA PARK, LA MIRADA, CERRITOS AND SANTA FE SPRINGS FROM ARTESIA BOULEVARD UNDERCROSSING TO NORTH FORK COYOTE CREEK |
| QA Service Level | 1 (Verified on 03/16/2016) |
Sample Information
| Sample Taken Date | 10/16/2019 | Sample Unique Key | 15 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/17/2019 |
| Sample type | Quality Control | A brief description of the sample | Rock and Sand |
| The quantity of what the sample constitutes | 1 Bag | From where was the sample collected | Source |
| First name of sampler or witnessed by | Luis | Last name of sampler or witnessed by | Solorio |
| Title of sampler | QC Field Technician | Telephone number of sampler | Unknown |
| Laboratory sample identification | Mix S70356 | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | National Ready Mix | Transportation Laboratory (TL) Number | Unknown |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | 00-0000 |
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0027::CORONA QUARRY |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Set 1 | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Belt |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1 inch |
| The concrete mix design number | S70356 | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-10-16-15
DIME Test ID: 2019-10-16-15-1
Testing Lab: G3 Quality, Incorporated - Cerritos
Test Method: ASTM C136-06: Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2019-11-18
Test Results
What type of gradation is being tested?: Combined Gradation
Input Type: Calculated
Tester's full name: Ronald Hernandez
Date of test: 10/17/2019
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 99 %
Cumulative percent passing the 3/4 in. sieve: 95 %
Cumulative percent passing the 1/2 in. sieve: 78 %
Cumulative percent passing the 3/8 in. sieve: 70 %
Cumulative percent passing the #4 sieve: 48 %
Cumulative percent passing the #8 sieve: 39 %
Cumulative percent passing the #16 sieve: 31 %
Cumulative percent passing the #30 sieve: 22 %
Cumulative percent passing the #50 sieve: 11 %
Cumulative percent passing the #100 sieve: 4 %
Cumulative percent passing the #200 sieve: 1.8 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/18/2019 ✔