Summary for Test 2019-06-05-18-7
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 212888 DEA: 07202124 EFIS: 0700020870 |
---|---|
DIST-CO-RTE-PM | 07-LA-710-20.9/24.6 |
Award Date | 02/16/2018 |
Closeout Date | 05/04/2022 |
Work Description | PAVEMENT REHABILITATION AND BRIDGE WIDENING |
Location Description | LOS ANGELES COUNTY IN AND NEAR BELL, VERNON, AND CITY OF COMMERCE, FROM 0.2 MILE SOUTH OF SLAUSON AVENUE OVERCROSSING TO 0.1 MILE NORTH OF THIRD STREET OVERCROSSING |
QA Service Level | 1 (Verified on 03/29/2018) |
Sample Information
Sample Taken Date | 06/05/2019 | Sample Unique Key | 18 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/05/2019 |
Sample type | Annual Source Testing | A brief description of the sample | 1.5" PCC gravels |
The quantity of what the sample constitutes | 12 Bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Unknown | Last name of sampler or witnessed by | Unknown |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 8604 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | United Rock-Olive pit Products Irwindale | Transportation Laboratory (TL) Number | None |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0015 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Stockpile @ Plant |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1-1/2 inch |
The concrete mix design number | Unknown | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-06-05-18
DIME Test ID: 2019-06-05-18-7
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2019-07-08
Test Results
What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Friday Ofoegbu
Date of test: 06/11/2019
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 23 %
Cumulative percent passing the 3/4 in. sieve: 5 %
Cumulative percent passing the 1/2 in. sieve: 1 %
Cumulative percent passing the 3/8 in. sieve: 1 %
Cumulative percent passing the #4 sieve: 1 %
Cumulative percent passing the #8 sieve: 1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/8/2019 ✔