Summary for Test 2019-04-29-20-4
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 213720 DEA: 024H2004 EFIS: 0218000094 |
---|---|
DIST-CO-RTE-PM | 02-SHA-89-26.3/29.2 |
Award Date | 12/19/2018 |
Closeout Date | 08/06/2019 |
Work Description | PAVEMENT OVERLAY |
Location Description | SHASTA COUNTY ABOUT 10 MILES NORTH OF BURNEY FROM 0.3 MILE NORTH OF CLARK CREEK ROAD TO LAKE BRITTON BRIDGE |
QA Service Level | 1 (Verified on 01/04/2019) |
Sample Information
Sample Taken Date | 04/29/2019 | Sample Unique Key | 20 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/30/2019 |
Sample type | Verification | A brief description of the sample | Untreated Virgin 1/2-inch Type A Aggregate |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Source |
First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | D77860F | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Shaw Pit | Transportation Laboratory (TL) Number | 827788 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-25-0008::SHAW PIT |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | 19-1278.105B |
The plant number | Unknown | A detailed description of where the material sample was collected | Lab-Batched from Sized Untreated Aggregate Stockpiles |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | JMF 19-05-S2 | Lot number | 0 |
Sublot number | 0 | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-04-29-20
DIME Test ID: 2019-04-29-20-4
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2019-06-06
Test Results
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 06/06/2019
Mass of saturated surface dry sample (before pycnometer) (S): 501.5 grams
Mass of the pycnometer with water and aggregate (C): 960.4 grams
Mass of the pycnometer with water (B): 648.1 grams
Mass of the oven dried sample (before pycnometer) (A): 486.3 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 501.5 grams
Mass of the oven dry aggregate (for absorption) (A): 486.3 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.570
Bulk specific gravity (SSD Basis): 2.651
Apparent specific gravity: 2.795
Absorption: 3.1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/6/2019 ✔