Test 2019-04-25-14-3 (AASHTO T85-13) Summary

Project Information
Project IdentifiersProject ID: 210808
DEA: 020E0904
EFIS: 0200000016
DIST-CO-RTE-PM02-SHA-5-R29.3/R31.1,R45.0/R45.8
Work DescriptionREPLACE BRIDGE, REALIGN ROADWAY AND SEISMIC RETROFIT
Location DescriptionIN SHASTA COUNTY ABT 8 MI N OF SHASTA LAKE CTY AND NEAR LAKEHEAD FRM TURNTABLE BAY O/C TO 0.1 MI N OF O'BRIEN SRRA & FRM 0.4 MI S TO 0.3 MI N OF DOG CREEK BRIDGE.
Sample Information
Sample Taken Date4/25/2019 Sample Unique Key14
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing4/25/2019
Sample typeVerification A brief description of the sample3/4-inch Type A Untreated Virgin Aggregate
The quantity of what the sample constitutesJMF Verification From where was the sample collectedSource
First name of sampler or witnessed byJosh Last name of sampler or witnessed byWilliams
Title of samplerConsultant Laboratory sample identificationD77853F
The fabricator/manufacturer/facility nameShasta Ranch Aggregates Transportation Laboratory (TL) Number001903
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleL190276
The plant numberUnknown A detailed description of where the material sample was collectedLab-Batched from Sized Untreated Aggregate Stockpiles
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberJMF 19-09-S1 Lot number0
Sublot number0 JMF Verification ID JMF3513-2019-63, JMF3513-2019-68, JMF3513-2020-193
Test Details
DIME Sample ID: 2019-04-25-14
DIME Test ID: 2019-04-25-14-3
Testing Lab: CT D02 - North Region Materials Lab
Test Method: AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)
Test Release Date: 2019-05-29
Test Results

Basis for relative density testing: Bulk
Input Type: Measured
Tester's full name: Arthur Mills
Date of test: 05/28/2019
Mass of sample saturated surface dry aggregate: 3334.2 grams
Mass of sample in water: 2105.6 grams
Mass of sample after oven drying: 3307.3 grams
Specific Gravity:2.692
Absorption:0.8 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 05/29/2019