Summary for Test 2013-07-24-14002336-1
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 3804 DEA: 07120304 EFIS: 0700000107 COOP: ENV005 |
---|---|
DIST-CO-RTE-PM | 07-LA-405-29.5-39.5 |
Award Date | 06/02/2009 |
Closeout Date | Not set |
Work Description | Design-Build 405 HOV Sepulveda Pass Widening Project-Northbound HOV Widening on I-405 from I-10 to US 101 |
Location Description | On the west side of Los Angeles from I-10 to US 101 |
QA Service Level | 2 (Verified on 05/01/2013) |
Sample Information
Sample Taken Date | 07/24/2013 | Sample Unique Key | 14002336 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 07/26/2013 |
Sample type | Acceptance | A brief description of the sample | 3/4 Max Class 2 Aggregate Base |
The quantity of what the sample constitutes | 2 Bags | From where was the sample collected | Other |
First name of sampler or witnessed by | Unknown | Last name of sampler or witnessed by | Unknown |
Title of sampler | Not set | Telephone number of sampler | Not set |
Laboratory sample identification | 3199B | Linked DIME Sample ID | Not set |
The fabricator/manufacturer/facility name | Stockpile at NB Getty Yard. | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Unknown |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Not set | The fabricator/manufacturer designation for the sample | Not set |
The plant number | Not set | A detailed description of where the material sample was collected | Stockpile at NB Getty Yard. |
Where the material sample would have been placed if not sampled | Not set | Primary Aggregate Nominal Size | |
The concrete mix design number | Lot number | Not set | |
Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2013-07-24-14002336
DIME Test ID: 2013-07-24-14002336-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2015-02-20
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Nader Rashidi
Date of test: 08/13/2013
Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 98 %
Cumulative percent passing the 1/2 in. sieve: 83 %
Cumulative percent passing the 3/8 in. sieve: 72 %
Cumulative percent passing the #4 sieve: 54 %
Cumulative percent passing the #8 sieve: 43 %
Cumulative percent passing the #16 sieve: 34 %
Cumulative percent passing the #30 sieve: 26 %
Cumulative percent passing the #50 sieve: 19 %
Cumulative percent passing the #100 sieve: 14 %
Cumulative percent passing the #200 sieve: 9 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/20/2015 ✔