Summary for Test 2019-04-30-6-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 213306 DEA: 07303404 EFIS: 0714000006 |
---|---|
DIST-CO-RTE-PM | 07-VEN-33-0.0/6.3 |
Award Date | 06/18/2018 |
Closeout Date | 05/10/2021 |
Work Description | COLD PLANE AC PVMT, PLACE RUBBERIZED AC (TYPE G), AND REPLACE PCC PVMT |
Location Description | VENTURA COUNTY IN AND NEAR VENTURA FROM ROUTE 33/101 SEPARATION TO 0.1 MILE SOUTH OF PARK VIEW DRIVE |
QA Service Level | 1 (Verified on 12/09/2020) |
Sample Information
Sample Taken Date | 04/30/2019 | Sample Unique Key | 6 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/03/2019 |
Sample type | Verification | A brief description of the sample | 3/4 HMA-A-SP |
The quantity of what the sample constitutes | PSE 4 bags | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Vulcan Materials | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0260A-19 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Sheldon, Big Rock Creek, Palmdale | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0017, 91-19-0019, 09-91-0021 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | 220831 SAT VLO |
The plant number | Unknown | A detailed description of where the material sample was collected | Manufacturer |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-04-30-6
DIME Test ID: 2019-04-30-6-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-06-06
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Larry Diaz
Date of test: 05/04/2019
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 99 %
Cumulative percent passing the 1/2 in. sieve: 84 %
Cumulative percent passing the 3/8 in. sieve: 72 %
Cumulative percent passing the 1/4 in. sieve: 72 %
Cumulative percent passing the #4 sieve: 54 %
Cumulative percent passing the #8 sieve: 37 %
Cumulative percent passing the #16 sieve: 26 %
Cumulative percent passing the #30 sieve: 18 %
Cumulative percent passing the #50 sieve: 12 %
Cumulative percent passing the #100 sieve: 6 %
Cumulative percent passing the #200 sieve: 3.2 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/30/2019 ✔