Summary for Test 2019-01-29-11-6
Test performed: AASHTO T104-99r16Project Information
| Project Identifiers | Project ID: 213469 DEA: 024C40V4 EFIS: 0218000125 |
|---|---|
| DIST-CO-RTE-PM | 02-SHA-5-R3.8/R11.7 |
| Award Date | 11/06/2018 |
| Closeout Date | 08/16/2023 |
| Work Description | WIDEN TO 6 LANES, BRIDGE REPLACEMENT AND WIDENING AND ROADWAY REHAB |
| Location Description | SHASTA COUNTY IN AND NEAR ANDERSON FROM ROUTE 5/273 SEPARATION TO 0.4 MILE SOUTH OF CHURN CREEK ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 12/31/2018) |
Sample Information
| Sample Taken Date | 01/29/2019 | Sample Unique Key | 11 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/01/2019 |
| Sample type | Verification | A brief description of the sample | Sized Untreated Aggregate |
| The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Anthony | Last name of sampler or witnessed by | Ortiz |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D77791 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Fawndale Rock Quarry | Transportation Laboratory (TL) Number | 736646 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0017::FAWNDALE ROCK QUARRY |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | 19-1001.314 |
| The plant number | Unknown | A detailed description of where the material sample was collected | Lab-Batched from Sized Untreated Aggregate Stockpiles |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | JMF 19-01-S1a | Lot number | 0 |
| Sublot number | 0 | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-01-29-11
DIME Test ID: 2019-01-29-11-6
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2019-04-17
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Coarse and Fine Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Previously used
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: HQ Agg
Date of test: 04/16/2019
Percentage of 2 ½ x 1 ½ material loss: 0 %
Percentage of 1 ½ x ¾ inch material loss: 0 %
Percentage of ¾ x ⅜ inch material loss: 0.7 %
Percentage of ⅜ inch x No. 4 material loss: 7 %
Percentage of No. 4 x 8 material loss: 2.8 %
Percentage of No. 8 x 16 material loss: 1.7 %
Percentage of No. 16 x 30 material loss: 1.2 %
Percentage of No. 30 x 50 material loss: 10.3 %
Coarse weighted average loss: 4 %
Fine weighted average loss: 3 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/17/2019 ✔