Summary for Test 2019-03-22-8-2
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 213309 DEA: 081H0904 EFIS: 0816000141 |
---|---|
DIST-CO-RTE-PM | 08-RIV-15-43.5 |
Award Date | 06/11/2018 |
Closeout Date | 12/12/2019 |
Work Description | CONSTRUCT A SECOND LEFT-TURN LANE |
Location Description | RIVERSIDE COUNTY IN NORCO AT SECOND STREET UNDERCROSSING. |
QA Service Level | 1 (Verified on 09/05/2018) |
Sample Information
Sample Taken Date | 03/22/2019 | Sample Unique Key | 8 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/26/2019 |
Sample type | Verification | A brief description of the sample | 3/4" RHMA-G-SP Aggregate |
The quantity of what the sample constitutes | JMF 6 Bags | From where was the sample collected | Fabricator |
First name of sampler or witnessed by | AAA Corona QC | Last name of sampler or witnessed by | AAA Corona QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0199G-19 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | All American Asphalt Corona | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0005::ALL AMERICAN ASPHALT |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 106835 | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Corona | A detailed description of where the material sample was collected | Belt cut of Coarse and Fine Aggregate at Source |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-03-22-8
DIME Test ID: 2019-03-22-8-2
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-05-15
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Husni Ankir
Date of test: 03/27/2019
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
50199 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
1406.0 grams | 97.2 % | |||||
8946.0 grams | 82.2 % | |||||
19310.0 grams | 61.5 % | |||||
19310 grams | 61.5 % | |||||
37527.0 grams | 25.2 % | |||||
250.0 grams | 12.8 % | |||||
331.0 grams | 8.8 % | |||||
376.0 grams | 6.6 % | |||||
407.0 grams | 5.1 % | |||||
432.0 grams | 3.9 % | |||||
451.0 grams | 2.92 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/8/2019 ✔