DIME - Test Summary

Summary for Test 2018-05-15-29-1

Test performed: AASHTO T27-14

Project Identifiers	Project ID: 212887 DEA: 024F79U4
DIST-CO-RTE-PM	02-SHA-151-5.5/R5.8
Award Date	01/29/2018
Closeout Date	01/08/2019
Work Description	HMA/RHMA PAVING AND ADA SIDEWALK WORK.
Location Description	SHASTA COUNTY IN SHASTA LAKE CITY FROM PANCAKE HILL DRIVE TO LOCUST AVENUE
QA Service Level	1 (Verified on 04/09/2018)

Sample Taken Date	05/15/2018	Sample Unique Key	29
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/15/2018
Sample type	Verification	A brief description of the sample	Lab-batched, 1/2-inch Type G Aggregate, Unreated
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Anthony	Last name of sampler or witnessed by	Ortiz
Title of sampler	Tester	Telephone number of sampler	Unknown
Laboratory sample identification	D77384	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Tullis Inc, Northstate Asphalt, Redding CA	Transportation Laboratory (TL) Number	002178
Inspector Lot Number from the Transportation Laboratory (TL) Form	JMF 18-11-S1	Structure unique identifier	Not set
Structure name	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sample	L180451	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	Lab-batched from untreated stockpiles
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number	JMF 18-11-S1	Lot number	Not set
Sublot number	Not set	Aggregate Mix Number	Not set
HMA Pay	No

DIME Sample ID: 2018-05-15-29

DIME Test ID: 2018-05-15-29-1

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Test Release Date: 2018-08-02

What type of gradation is being tested?: HMA Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes

Has the fine aggregate sample been reduced?: No

Input Type: Calculated

Tester's full name: NRML-R

Date of test: 05/16/2018

Cumulative percent passing the 1 1/2 in. sieve: 100 %

Cumulative percent passing the 1 in. sieve: 100 %

Cumulative percent passing the 3/4 in. sieve: 100 %

Cumulative percent passing the 1/2 in. sieve: 96 %

Cumulative percent passing the 3/8 in. sieve: 86.5 %

Cumulative percent passing the 1/4 in. sieve: 56.2 %

Cumulative percent passing the #4 sieve: 36.9 %

Cumulative percent passing the #8 sieve: 18.2 %

Cumulative percent passing the #16 sieve: 11.8 %

Cumulative percent passing the #30 sieve: 8.1 %

Cumulative percent passing the #50 sieve: 5.8 %

Cumulative percent passing the #100 sieve: 4.2 %

Cumulative percent passing the #200 sieve: 3.15 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/2/2018 ✔