DIME - Test Summary

Summary for Test 2017-05-17-15-1

Test performed: AASHTO T27-14

Project Identifiers	Project ID: 212886 DEA: 023H1204
DIST-CO-RTE-PM	02-TEH-5-R0.0/R22.4
Award Date	01/03/2018
Closeout Date	02/06/2019
Work Description	COLD PLANE RAC-O, PLACE RHMA-O, REPLACE AC SURFACING, MBGR
Location Description	TEHAMA COUNTY AT AND NEAR CORNING FROM GLENN COUNTY LINE TO 0.3 MILE NORTH OF BRANCH COYOTE CREEK BRIDGE
QA Service Level	1 (Verified on 01/08/2019)

Sample Taken Date	05/17/2017	Sample Unique Key	15
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/05/2017
Sample type	Verification	A brief description of the sample	Laboratory-Combined Untreated Virgin 3/4-inch Type A Aggregate
The quantity of what the sample constitutes	JMF Verification	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Joseph	Last name of sampler or witnessed by	Sturges
Title of sampler	PEI Tech	Telephone number of sampler	Unknown
Laboratory sample identification	D76918F	Linked DIME Sample ID	Unknown
The fabricator/manufacturer/facility name	Tullis, Inc - Northstate Asphalt - Redding, CA	Transportation Laboratory (TL) Number	851339
Inspector Lot Number from the Transportation Laboratory (TL) Form	Unknown	Structure unique identifier	Not set
Structure name	Not set

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sample	Combined Virgin Aggregate	The fabricator/manufacturer designation for the sample	Unknown
The plant number	Unknown	A detailed description of where the material sample was collected	Stockpile at the Plant
Where the material sample would have been placed if not sampled	Unknown	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	17-04-S1	Lot number	Not set
Sublot number	Not set	Aggregate Mix Number	Not set
HMA Pay	No

DIME Sample ID: 2017-05-17-15

DIME Test ID: 2017-05-17-15-1

Testing Lab: CT D02 - Redding Northern Regional Laboratory

Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)

Test Release Date: 2018-07-13

What type of gradation is being tested?: Combined Gradation

Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained

Does this test use 1/4 sieve? (question for HMA Gradation Type): No

Has the fine aggregate sample been reduced?: No

Input Type: Calculated

Tester's full name: NRML-R

Date of test: 05/05/2017

Cumulative percent passing the 2 in. sieve: 100 %

Cumulative percent passing the 1 1/2 in. sieve: 100 %

Cumulative percent passing the 1 in. sieve: 100 %

Cumulative percent passing the 3/4 in. sieve: 90.2 %

Cumulative percent passing the 1/2 in. sieve: 71.9 %

Cumulative percent passing the 3/8 in. sieve: 52.4 %

Cumulative percent passing the #4 sieve: 45.1 %

Cumulative percent passing the #8 sieve: 29.8 %

Cumulative percent passing the #16 sieve: 20.2 %

Cumulative percent passing the #30 sieve: 14 %

Cumulative percent passing the #50 sieve: 9.6 %

Cumulative percent passing the #100 sieve: 6.7 %

Cumulative percent passing the #200 sieve: 5.01 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/13/2018 ✔