Summary for Test 2014-03-12-9008346-4
Test performed: ASTM C39-10Project Information
| Project Identifiers | Project ID: 7780 DEA: 112T1824 EFIS: 1100020051 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-805-4.7/5.6 |
| Award Date | 01/03/2013 |
| Closeout Date | 09/07/2018 |
| Work Description | REPLACE STRUCTURE AND CONSTRUCT DIRECT ACCESS RAMP (DAR). |
| Location Description | SAN DIEGO COUNTY IN CHULA VISTA FROM 0.4 MILE SOUTH OF EAST PALOMAR STREET OVERCROSSING TO 0.1 MILE NORTH OF NAPLES STREET UNDERCROSSING |
| QA Service Level | 1 (Verified on 12/10/2012) |
Sample Information
| Sample Taken Date | 03/12/2014 | Sample Unique Key | 9008346 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/14/2014 |
| Sample type | Verification | A brief description of the sample | concrete cylinders |
| The quantity of what the sample constitutes | 4 cylinders | From where was the sample collected | Other |
| First name of sampler or witnessed by | Aston | Last name of sampler or witnessed by | James |
| Title of sampler | Not set | Telephone number of sampler | Not set |
| Laboratory sample identification | Not set | Linked DIME Sample ID | Not set |
| The fabricator/manufacturer/facility name | Jobsite | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set |
Material Information
| Material Type | Concrete | The concrete mix design number | 104009F |
|---|---|---|---|
| The truck number from where the sample was collected | 1332 | The batch plant ticket number from where the sample was collected | 106080 |
| Concrete batch plant | Not set | The fabricator/manufacturer designation for the sample | Not set |
| A detailed description of where the material sample was collected | Brige Soffit - North Side | Where the material sample would have been placed if not sampled | Not set |
| From Lot No. | Not set | Bag Lot No. | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2014-03-12-9008346
DIME Test ID: 2014-03-12-9008346-4
Testing Lab: Leighton Consulting, Incorporated - San Diego
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2014-07-08
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Measured
Tester's full name: Matt Vinet
Date of test: 03/19/2014
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 6.02 in
Average diameter of cylinder 2: 6.03 in
Maximum load on cylinder 1: 95650 lb
Maximum load on cylinder 2: 96080 lb
Type of fracture pattern of cylinder 1: 1
Type of fracture pattern of cylinder 2: 1
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1.00
Correction factor for cylinder 2: no data
Age of specimen: 7 days
Cross sectional area of cylinder 1: 28.46 in^2
Cross sectional area of cylinder 2: 28.56 in^2
Compressive strength of cylinder 1: 3,360.9 psi
Compressive strength of cylinder 2: 3,364.1 psi
Compressive strength (to nearest 10 psi): 3360 psi
General comments (publicly viewable) (Max 1000 characters): Design Strength 4000 psi at 28 days
Test was verified on 7/8/2014 ✔