Summary for Test 2018-04-26-4-2
Test performed: AASHTO T104-99r16Project Information
| Project Identifiers | Project ID: 210808 DEA: 020E0904 EFIS: 0200000016 |
|---|---|
| DIST-CO-RTE-PM | 02-SHA-5-R29.3/R31.1,R45.0/R45.8 |
| Award Date | 02/03/2016 |
| Closeout Date | 10/21/2020 |
| Work Description | REPLACE BRIDGE, REALIGN ROADWAY AND SEISMIC RETROFIT |
| Location Description | IN SHASTA COUNTY ABT 8 MI N OF SHASTA LAKE CTY AND NEAR LAKEHEAD FRM TURNTABLE BAY O/C TO 0.1 MI N OF O'BRIEN SRRA & FRM 0.4 MI S TO 0.3 MI N OF DOG CREEK BRIDGE. |
| QA Service Level | 1 (Verified on 09/23/2015) |
Sample Information
| Sample Taken Date | 04/26/2018 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/01/2018 |
| Sample type | Quality Control | A brief description of the sample | Lightweight Aggregate |
| The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Distributor |
| First name of sampler or witnessed by | Dennis | Last name of sampler or witnessed by | Hickey |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | 18-0076 | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Utelite | Transportation Laboratory (TL) Number | C571799 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | NA |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Stockpile |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | Unknown | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
| HMA Pay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-04-26-4
DIME Test ID: 2018-04-26-4-2
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2018-05-24
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Coarse Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Previously used
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: Phillip Montes
Date of test: 05/24/2018
Percentage of 2 ½ x 1 ½ material loss: no data
Percentage of 1 ½ x ¾ inch material loss: no data
Percentage of ¾ x ⅜ inch material loss: no data
Percentage of ⅜ inch x No. 4 material loss: no data
Coarse weighted average loss: 17.5 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/24/2018 ✔