Summary for Test 2018-02-02-31-1

Test performed: AASHTO T27-14

Project Information

Project IdentifiersProject ID: 212852
DEA: 010H7604
DIST-CO-RTE-PM01-MEN-101-33.0/42.0
Award Date10/10/2017
Closeout Date08/06/2020
Work DescriptionFire Damage Repairs: Roadway Repair, Drainage/Slope Repair, Erosion Control, Fencing, MBGR and Sign Replacement, Hazard Tree and Debris Removal.
Location DescriptionNot set
QA Service Level1 (Verified on 01/26/2018)

Sample Information

Sample Taken Date02/02/2018 Sample Unique Key31
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing02/05/2018
Sample typeVerification A brief description of the sampleJMF Verification
The quantity of what the sample constitutesJMF Verification From where was the sample collectedFabricator
First name of sampler or witnessed bya Last name of sampler or witnessed byUnknown
Title of samplertet Telephone number of samplerUnknown
Laboratory sample identification61894 Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility namegranite ukiah Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-23-0015::HARRIS QUARRY
The fabricator's/manufacturer's product name for the sample1060_1/2 HMA64-16R15LAS-SP The fabricator/manufacturer designation for the sample1060_1/2 HMA64-16R15LAS-SP
The plant numberUnknown A detailed description of where the material sample was collectedcoldfeed
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberUnknown Lot numberNot set
Sublot numberNot set Aggregate Mix NumberNot set
HMA PayNo

Test Details

DIME Sample ID: 2018-02-02-31
DIME Test ID: 2018-02-02-31-1
Testing Lab: CT D01 - District 1 Materials Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2018-04-18

Test Results


What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Leif Ayres
Date of test: 04/11/2018
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 95.8 %
Cumulative percent passing the 3/8 in. sieve: 87.9 %
Cumulative percent passing the 1/4 in. sieve: 87.9 %
Cumulative percent passing the #4 sieve: 58 %
Cumulative percent passing the #8 sieve: 36.3 %
Cumulative percent passing the #16 sieve: 22.1 %
Cumulative percent passing the #30 sieve: 14.8 %
Cumulative percent passing the #50 sieve: 9.7 %
Cumulative percent passing the #100 sieve: 6.5 %
Cumulative percent passing the #200 sieve: 4.2 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 4/11/2018