Summary for Test 2018-03-28-10-1
Test performed: CTM 673-July 2012Project Information
Project Identifiers | DEA: No Project |
---|---|
DIST-CO-RTE-PM | --- |
Award Date | Not set |
Closeout Date | 11/01/2022 |
Work Description | Special project identifier for material not associated with a project |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 03/28/2018 | Sample Unique Key | 10 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/30/2018 |
Sample type | Quality Assurance | A brief description of the sample | Joint Seal |
The quantity of what the sample constitutes | 1 | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Watson Bowman | Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 1018178 |
---|---|---|---|
Manufacturer(s) | Watson Bowman | Temperature | 70 |
Humidity | 50 | Comments | Unknown |
Joint Seal Size | 3.75 |
Test Details
DIME Sample ID: 2018-03-28-10
DIME Test ID: 2018-03-28-10-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2018-05-03
Test Results
Input Type: Measured
Tester's full name: Randy
Date of test: 04/03/2018
UTM: 11KIP
Temperature: no data
Humidity: 50 %
Load at W1: 56.2739 lbs
Width at 4 x Load at W1: 1.55768 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.937 in
Measured Minimum Uncompressed Width: 3.822 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.75 in
Height of Contact Face: 3.692 in
Length: no data
Spec Minimum Uncompressed Width: 3.75 in
Area (5 Times of the Height of Contact Face): 18.46 sqin
Half of the Spec Minimum Uncompressed Width: 1.875 in
85 Percent of the Spec Minimum Uncompressed Width: 3.1875 in
3 Times of the Area: 55.38 sqin
4 Times of the Load at W1: 225.096 in
W1 (US Units): 3.188 in
W1 (Metric Units): 80.963 millimeters
W2 (US Units): 1.558 in
W2 (Metric Units): 39.565 millimeters
Satisfactory of MR of (US Units): 1.63 in
Satisfactory of MR of (Metric Units): 41.397 millimeters
Optional W1 Measurement 1: 3.2487 in
Optional W1 Measurement 2: 55.7492 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 4/26/2018 ✔