Summary for Test 2018-03-19-13-1

Test performed: CTM 673-July 2012

Project Information

Project Identifiers
DEA: No Project
DIST-CO-RTE-PM---
Award DateNot set
Closeout Date11/01/2022
Work DescriptionSpecial project identifier for material not associated with a project
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date03/19/2018 Sample Unique Key13
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/26/2018
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes1 From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameD S Brown Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0218165-B
Manufacturer(s)D S Brown Temperature70
Humidity50 CommentsUnknown
Joint Seal Size3.5

Test Details

DIME Sample ID: 2018-03-19-13
DIME Test ID: 2018-03-19-13-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2018-05-01

Test Results


Input Type: Measured
Tester's full name: Randy
Date of test: 03/28/2018
UTM: 11KIP
Temperature: 70 ?F
Humidity: 50 %
Load at W1: 48.8252 lbs
Width at 4 x Load at W1: 1.49856 in
Nominal Width: 3.5 in
Measured Maximum Uncompressed Width: 3.759 in
Measured Minimum Uncompressed Width: 3.635 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.675 in
Height of Contact Face: 3.537 in
Length: no data
Spec Minimum Uncompressed Width: 3.635 in
Area (5 Times of the Height of Contact Face): 17.685 sqin
Half of the Spec Minimum Uncompressed Width: 1.8375 in
85 Percent of the Spec Minimum Uncompressed Width: 3.08975 in
3 Times of the Area: 53.055 sqin
4 Times of the Load at W1: 195.301 in
W1 (US Units): 3.09 in
W1 (Metric Units): 78.48 millimeters
W2 (US Units): 1.499 in
W2 (Metric Units): 38.063 millimeters
Satisfactory of MR of (US Units): 1.591 in
Satisfactory of MR of (Metric Units): 40.416 millimeters
Optional W1 Measurement 1: 3.0898 in
Optional W1 Measurement 2: 53.4087 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 4/24/2018