Summary for Test 2018-02-27-19-3
Test performed: AASHTO T275-07r12Project Information
Project Identifiers | Project ID: 212679 DEA: 023E7204 EFIS: 0200020154 |
---|---|
DIST-CO-RTE-PM | 02-TEH-36-42.1/46.0 |
Award Date | 12/18/2017 |
Closeout Date | 08/07/2019 |
Work Description | COLD PLANING, PAVING, MINOR CONCRETE, ELECTRICAL AND STRIPING WORK. |
Location Description | TEHAMA COUNTY IN AND NEAR RED BLUFF FROM EAST SAND SLOUGH BRIDGE TO 0.6 MILE EAST OF STICE ROAD |
QA Service Level | 1 (Verified on 05/24/2018) |
Sample Information
Sample Taken Date | 02/27/2018 | Sample Unique Key | 19 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/27/2018 |
Sample type | Verification | A brief description of the sample | 1/2-inch Type A HMA |
The quantity of what the sample constitutes | JMF | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Cheryl | Last name of sampler or witnessed by | Abraham |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | D77290 | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Tullis, Inc - Northstate Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 852087 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 1/2 inch | Lot number | Not set |
Sublot number | Not set | JMF Verification ID | JMF3513-2018-19 |
HMA Pay | No |
Test Details
DIME Sample ID: 2018-02-27-19
DIME Test ID: 2018-02-27-19-3
Testing Lab: CT D02 - North Region Materials Lab
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2018-03-27
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 03/01/2018
Mass of the dry specimen in air: 4608.7 g
Mass of the dry specimen plus paraffin coating in air: 4657.5 g
Mass of the dry specimen plus paraffin coating in water: 2650.6 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4608.7 g
Mass 2 of the dry specimen plus paraffin coating in air: 4658.2 g
Mass 2 of the dry specimen plus paraffin coating in water: 2651.7 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4608.4 g
Mass 3 of the dry specimen plus paraffin coating in air: 4661.7 g
Mass 3 of the dry specimen plus paraffin coating in water: 2655.7 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.360
Bulk Specific Gravity 2: 2.362
Bulk Specific Gravity 3: 2.367
Average Bulk Specific Gravity:2.363
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/27/2018 ✔