Summary for Test 2018-03-15-3-6

Test performed: CTM 673-July 2012

Project Information

Project Identifiers
DEA: No Project
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project identifier for material not associated with a project
Location DescriptionNot set

Sample Information

Sample Taken Date03/15/2018 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/19/2018
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes1 From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0818167
Manufacturer(s)Watson Bowman Temperature70
Humidity50 CommentsUnknown
Joint Seal Size2.75

Test Details

DIME Sample ID: 2018-03-15-3
DIME Test ID: 2018-03-15-3-6
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2018-04-03

Test Results

Input Type: Measured
Tester's full name: Brian
Date of test: 03/27/2018
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 48.9997 lbs
Width at 4 x Load at W1: 1.23967 in
Nominal Width: 2.75 in
Measured Maximum Uncompressed Width: 2.9595 in
Measured Minimum Uncompressed Width: 2.901 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 2.884 in
Height of Contact Face: 2.8955 in
Spec Minimum Uncompressed Width: 2.884 in
Area (5 Times of the Height of Contact Face): 14.478 sqin
Half of the Spec Minimum Uncompressed Width: 1.442 in
85 Percent of the Spec Minimum Uncompressed Width: 2.4514 in
3 Times of the Area: 43.434 sqin
4 Times of the Load at W1: 195.999 in
W1 (US Units):2.451 in
W1 (Metric Units):62.266 millimeters
W2 (US Units):1.24 in
W2 (Metric Units):31.488 millimeters
Satisfactory of MR of (US Units):1.212 in
Satisfactory of MR of (Metric Units):30.778 millimeters
Optional W1 Measurement 1:2.4659 in
Optional W1 Measurement 2:43.7236 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point File
Test graph for 2018-03-15-3-6

Test was verified on 3/27/2018