Summary for Test 2018-02-09-4-10
Test performed: CTM 670-December 2013Project Information
| Project Identifiers | Project ID: 208967 DEA: 110223U4 EFIS: 1112000102 |
|---|---|
| DIST-CO-RTE-PM | 11-SD-5,89-R29.1/R30.5 |
| Award Date | 12/18/2014 |
| Closeout Date | 02/04/2022 |
| Work Description | REPLACE AND WIDEN BRIDGE, RECONSTRUCT RAMPS AND INTERSECTION. |
| Location Description | SAN DIEGO COUNTY IN SAN DIEGO FROM 0.4 MILE SOUTH OF GENESEE AVENUE OVERCROSSING TO SORRENTO VIADUCT |
| QA Service Level | 1 (Verified on 01/21/2015) |
Sample Information
| Sample Taken Date | 02/09/2018 | Sample Unique Key | 4 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/13/2018 |
| Sample type | Quality Assurance | A brief description of the sample | 3 sets of 4 size 11 rebar with Lenton A2 couplers, 1 set of 4 size 11 rebar with Barlock couplers |
| The quantity of what the sample constitutes | 16 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Michael | Last name of sampler or witnessed by | Charak |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Gerdau | Transportation Laboratory (TL) Number | C604717 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | SMTL TM5 - Couplers | Production or Authorization Testing | Production Testing |
|---|---|---|---|
| Service or Ultimate | Service | Material Standard Code | ASTM A706 |
| Material Grade | 60 | Rebar Manufacturer | Gerdau |
| Coupler Manufacturer | Lenton Dayton | Intermediate Assembler or Fabricator | Unknown |
| Rebar Size | 11 | Coupler Model | Lenton A2 standard Dayton Barlock |
| Coating Standards | Uncoated | Shape of Rebar | Straight |
| Rebar Hoop Diameter | Unknown | Rebar Hoop Fabricator | Unknown |
| Coupler Component Heat/Lot Number(s) | MM16106572, L8476, L7928, L9171, | Rebar Heat Number(s) | 6502861802 |
| Rebar Size 2 | Not set | Coupler Unique ID | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-02-09-4
DIME Test ID: 2018-02-09-4-10
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 670-December 2013: Method of Tests for Mechanical and Welded Reinforcing Steel Splices (Tensile Slip)
Test Release Date: 2018-02-27
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: Fred
Date of test: 02/16/2018
UTM: 2000KIP
Halo ID: Big
Temperature: 72 F
| Num | Sample | Mfg. Lot Number(s) | Size | Area (sqin) | Slip (inch) | Peak Load (lbf) | Peak Stress (psi) | Comments | Tested By |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 3 | #11/36mm | 1.56 | 0 | 139216 | 89241 | Service Splice | Fred |
General comments (publicly viewable) (Max 1000 characters): Service Splice
Test Graph
Source: Partner Data Point FileTest graph for the Sample
Test was verified on 2/20/2018 ✔