Summary for Test 2018-01-29-4-3

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 88888
DEA: SMTL-STOCK
EFIS: SMTL-STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date01/29/2018 Sample Unique Key4
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing01/31/2018
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes500ft From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberNA
Inspector Lot Number from the Transportation Laboratory (TL) FormNA Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0518123
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size2.75

Test Details

DIME Sample ID: 2018-01-29-4
DIME Test ID: 2018-01-29-4-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2018-02-27

Test Results


Input Type: Measured
Tester's full name: Randy
Date of test: 02/06/2018
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 59.7512 lbs
Width at 4 x Load at W1: 1.29725 in
Nominal Width: 2.75 in
Measured Maximum Uncompressed Width: 3.029 in
Measured Minimum Uncompressed Width: 2.915 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 2.872 in
Height of Contact Face: 2.922 in
Length: no data
Spec Minimum Uncompressed Width: 2.872 in
Area (5 Times of the Height of Contact Face): 14.61 sqin
Half of the Spec Minimum Uncompressed Width: 1.436 in
85 Percent of the Spec Minimum Uncompressed Width: 2.4412 in
3 Times of the Area: 43.83 sqin
4 Times of the Load at W1: 239.005 in
W1 (US Units): 2.441 in
W1 (Metric Units): 62.006 millimeters
W2 (US Units): 1.297 in
W2 (Metric Units): 32.95 millimeters
Satisfactory of MR of (US Units): 1.144 in
Satisfactory of MR of (Metric Units): 29.056 millimeters
Optional W1 Measurement 1: 2.4778 in
Optional W1 Measurement 2: 44.1222 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 2/20/2018