Summary for Test 2017-12-21-3-2
Test performed: ASTM F606-14Project Information
| Project Identifiers | Project ID: 211504 DEA: 060N9904 EFIS: 0612000114 |
|---|---|
| DIST-CO-RTE-PM | 06-FRE,MAD-41U-33.1/33.4,0.0/0.3 |
| Award Date | 10/13/2016 |
| Closeout Date | 10/02/2019 |
| Work Description | BRIDGE SCOUR MITIGATION, SEISMIC RETROFIT AND UPGRADE RAIL. |
| Location Description | FRESNO AND MADERA COUNTIES NEAR FRESNO FROM 0.1 MILE NORTH OF PERRIN ROAD UNDERCROSSING TO 0.1 MILE SOUTH OF AVENUE 9 UNDERCROSSING |
| QA Service Level | 1 (Verified on 10/05/2016) |
Sample Information
| Sample Taken Date | 12/21/2017 | Sample Unique Key | 3 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/21/2017 |
| Sample type | Quality Assurance | A brief description of the sample | 5/8 x 12 A449 HDG all thread |
| The quantity of what the sample constitutes | 12 of 1052 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Scott | Last name of sampler or witnessed by | Leavitt |
| Title of sampler | QA Inspector | Telephone number of sampler | 510 590-0116 |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | UIS | Transportation Laboratory (TL) Number | Unknown |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | S28-388-17 | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
|---|---|---|---|
| Heat Number(s) | DL1610509502 | Nut Mfg. Lot Number(s) | N/A |
| Washer Mfg. Lot Number(s) | N/A | Bolt Specification | A449 |
| Bolt Length(s) | 12" | Nut Specification | N/A |
| Washer Specification | N/A | Finish | HDG |
| Diameter/Size | 5/8 | Bolt Mfg. Lot Number | 29947 |
| Rocap Test Requirement(s) | No | Lubricant Requirements(s) | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-12-21-3
DIME Test ID: 2017-12-21-3-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2018-01-11
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: Brian
Date of test: 01/03/2018
UTM: 400KIP
Temperature: 72
| Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 1B | A449 All Thread Rod | 0.226 | 30344 | 134 | 134266 | 122285 | 27636 | A449 All Thread Rod |
General comments (publicly viewable) (Max 1000 characters): A449 All Thread Rod
Test Graph
Source: Partner Data Point FileTest was verified on 1/4/2018 ✔