Summary for Test 2013-12-19-7583960-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 208869 DEA: 08368504 EFIS: 0800000628 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-177.3/181.1 |
| Award Date | 07/25/2013 |
| Closeout Date | Not set |
| Work Description | CONSTRUCT COMMERCIAL VEHICLE ENFORCEMENT FACILITY (CVEF) |
| Location Description | SAN BERNARDINO COUNTY FROM 1.2 MILES NORTH OF NIPTON ROAD OVERCROSSING TO 0.5 MILE SOUTH OF YATES WELL ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 10/08/2013) |
Sample Information
| Sample Taken Date | 12/19/2013 | Sample Unique Key | 7583960 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/30/2013 |
| Sample type | Acceptance | A brief description of the sample | Class 2 Aggregate Base |
| The quantity of what the sample constitutes | 2 Bags | From where was the sample collected | Other |
| First name of sampler or witnessed by | Larry | Last name of sampler or witnessed by | Unknown |
| Title of sampler | Not set | Telephone number of sampler | Not set |
| Laboratory sample identification | 3361B | Linked DIME Sample ID | Not set |
| The fabricator/manufacturer/facility name | I-15 SB Shoulder Sta. 9387 40 | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA or name of Pit) | Unknown |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Not set | The fabricator/manufacturer designation for the sample | Not set |
| The plant number | Not set | A detailed description of where the material sample was collected | I-15 SB Shoulder Sta. 9387 40 |
| Where the material sample would have been placed if not sampled | Not set | Primary Aggregate Nominal Size | |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2013-12-19-7583960
DIME Test ID: 2013-12-19-7583960-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2015-02-20
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Vincent Onoh
Date of test: 01/02/2014
Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 90 %
Cumulative percent passing the 1/2 in. sieve: 76 %
Cumulative percent passing the 3/8 in. sieve: 65 %
Cumulative percent passing the #4 sieve: 36 %
Cumulative percent passing the #8 sieve: 23 %
Cumulative percent passing the #16 sieve: 15 %
Cumulative percent passing the #30 sieve: 12 %
Cumulative percent passing the #50 sieve: 9 %
Cumulative percent passing the #100 sieve: 8 %
Cumulative percent passing the #200 sieve: 8 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/20/2015 ✔