Summary for Test 2017-09-28-7-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 88888
DEA: SMTL-STOCK
EFIS: SMTL-STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date09/28/2017 Sample Unique Key7
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/29/2017
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes550ft From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberNA
Inspector Lot Number from the Transportation Laboratory (TL) FormNA Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)1717361
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size3.75

Test Details

DIME Sample ID: 2017-09-28-7
DIME Test ID: 2017-09-28-7-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-10-18

Test Results


Input Type: Measured
Tester's full name: Brian
Date of test: 10/03/2017
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 56.937 lbs
Width at 4 x Load at W1: 1.55215 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.8915 in
Measured Minimum Uncompressed Width: 3.675 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.75 in
Height of Contact Face: 3.56 in
Length: no data
Spec Minimum Uncompressed Width: 3.675 in
Area (5 Times of the Height of Contact Face): 17.8 sqin
Half of the Spec Minimum Uncompressed Width: 1.875 in
85 Percent of the Spec Minimum Uncompressed Width: 3.12375 in
3 Times of the Area: 53.4 sqin
4 Times of the Load at W1: 227.748 in
W1 (US Units): 3.124 in
W1 (Metric Units): 79.343 millimeters
W2 (US Units): 1.552 in
W2 (Metric Units): 39.425 millimeters
Satisfactory of MR of (US Units): 1.572 in
Satisfactory of MR of (Metric Units): 39.919 millimeters
Optional W1 Measurement 1: 3.1238 in
Optional W1 Measurement 2: 53.756 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 10/11/2017