Summary for Test 2024-11-27-14-1
Test performed: AASHTO T308-10Project Information
Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 11/27/2024 | Sample Unique Key | 14 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/10/2024 |
Sample type | Verification | A brief description of the sample | JMF-PP |
The quantity of what the sample constitutes | 24 BOXES RWMA | From where was the sample collected | Source |
First name of sampler or witnessed by | Derrick | Last name of sampler or witnessed by | McCovy |
Title of sampler | Telephone number of sampler | 6193722435 | |
Laboratory sample identification | 7002-JMF | Linked DIME Sample ID | 2024-11-27-15 |
The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/4 inch | Lot number | |
Sublot number | HMA Mix Number | 220200 Otay Val |
Test Details
DIME Sample ID: 2024-11-27-14
DIME Test ID: 2024-11-27-14-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2025-01-16
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Daniel Smith
Date of test: 01/16/2025
Test procedure used?: Method A
Mass of the specimen basket assembly: 4,015.7 g
Mass of the specimen and specimen basket assembly prior to ignition: 6,070.2 g
Mass of HMA Sample prior to ignition: 2,054.5 g
Mass Loss: 118.9 g
Mass of aggregate remaining after ignition: 1,935.6 g
Correction Factor (Percent by mass of HMA Specimen): 0.62 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.00 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 5.17 %
General comments (publicly viewable) (Max 1000 characters): Complies Target 4.70% and tested 5.17% Saved Material for T30
Test was verified on 1/16/2025 ✔