Summary for Test 2024-10-01-49-2
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 993529 DEA: 11430514 EFIS: 1119000008 |
---|---|
DIST-CO-RTE-PM | 11-SD-15-R31.3/R37.1 |
Award Date | 05/27/2022 |
Closeout Date | Not set |
Work Description | CRCP, FIBER OPTIC CABLE, AND HMA. |
Location Description | SAN DIEGO COUNTY IN AND NEAR ESCONDIDO FROM 0.2 MILE SOUTH OF ROUTE 15/78 SEPARATION TO 0.5 MILE NORTH OF DEER SPRINGS ROAD OVERCROSSING |
QA Service Level | 1 (Verified on 02/07/2022) |
Sample Information
Sample Taken Date | 10/01/2024 | Sample Unique Key | 49 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/03/2024 |
Sample type | Quality Assurance | A brief description of the sample | concrete aggregates |
The quantity of what the sample constitutes | 3 Bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Pete | Last name of sampler or witnessed by | Horn |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 6669-S | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Security Paving | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | N/A |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2024-10-01-49
DIME Test ID: 2024-10-01-49-2
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2024-10-28
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: Yes
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Mohammad Abbassi
Date of test: 10/28/2024
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
1542 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
44.0 grams | 97 % | |||||
1,259.0 grams | 18 % | |||||
276 grams | ||||||
231.5 grams | 3 % | |||||
246.2 grams | 2 % | |||||
254.3 grams | 1 % | |||||
259.1 grams | 1 % | |||||
263.0 grams | 1 % | |||||
265.9 grams | 1 % |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/28/2024 ✔