Summary for Test 2017-07-25-11-1
Test performed: CTM 673-July 2012Project Information
| Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 07/25/2017 | Sample Unique Key | 11 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/27/2017 |
| Sample type | Quality Assurance | A brief description of the sample | Type B Joint Seal |
| The quantity of what the sample constitutes | 1 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Watson Bowman | Transportation Laboratory (TL) Number | NA |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | NA | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 1117299 |
|---|---|---|---|
| Manufacturer(s) | Watson Bowman | Temperature | 72 |
| Humidity | 45 | Comments | Unknown |
| Joint Seal Size | 3.750 |
Test Details
DIME Sample ID: 2017-07-25-11
DIME Test ID: 2017-07-25-11-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-08-15
Test Results
Input Type: Measured
Tester's full name: Brian
Date of test: 08/02/2017
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 57.1242 lbs
Width at 4 x Load at W1: 1.56987 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 4.0105 in
Measured Minimum Uncompressed Width: 3.861 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.825 in
Height of Contact Face: 3.6445 in
Spec Minimum Uncompressed Width: 3.825 in
Area (5 Times of the Height of Contact Face): 18.223 sqin
Half of the Spec Minimum Uncompressed Width: 1.9125 in
85 Percent of the Spec Minimum Uncompressed Width: 3.25125 in
3 Times of the Area: 54.669 sqin
4 Times of the Load at W1: 228.497 in
W1 (US Units): 3.251 in
W1 (Metric Units): 82.582 millimeters
W2 (US Units): 1.57 in
W2 (Metric Units): 39.875 millimeters
Satisfactory of MR of (US Units): 1.681 in
Satisfactory of MR of (Metric Units): 42.707 millimeters
Optional W1 Measurement 1: 3.2819 in
Optional W1 Measurement 2: 55.0335 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point FileTest graph for 2017-07-25-11-1
Test was verified on 8/8/2017 ✔