Summary for Test 2017-07-21-3-3
Test performed: ASTM D624-00-re12Project Information
| Project Identifiers | Project ID: 212253 DEA: 010H0304 EFIS: 0117000087 |
|---|---|
| DIST-CO-RTE-PM | 01-HUM-96-20.0/24.0, 0.83 |
| Award Date | 02/22/2017 |
| Closeout Date | 01/08/2019 |
| Work Description | REPAIR SLIPOUT |
| Location Description | IN HUMBOLDT COUNTY NEAR WEITCHPEC FROM 3.0 MILES OF KLAMATH RIVER BRIDGE #04-0144 TO 0.6 MILE EAST OF WEITCHPEC ROAD |
| QA Service Level | 1 (Verified on 04/24/2017) |
Sample Information
| Sample Taken Date | 07/21/2017 | Sample Unique Key | 3 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 07/24/2017 |
| Sample type | Quality Assurance | A brief description of the sample | 1 x 8 x 12 reinforced bearing pad |
| The quantity of what the sample constitutes | 1 lot of 43 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Stacey | Last name of sampler or witnessed by | Davis |
| Title of sampler | QAI | Telephone number of sampler | 5624806904 |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Cal-Neva | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | B362-075-17 | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | N/A Heat 811V04180 |
|---|---|---|---|
| Material/Compound/Elastomer ID | RL305502 | Samples Representing | 1 lot of 43 |
| Description (size) | 1 x 8 12 | Comments | |
| Description (Number of Shims) | 2 | Type of Bearing Pad | Steel |
| Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Arcelormittal |
| Batch Number | 071017 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-07-21-3
DIME Test ID: 2017-07-21-3-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D624-00-re12: Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
Test Release Date: 2017-08-07
Test Results
Number of specimens tested: 5
Input Type: Measured
Tester's full name: Brian
Date of test: 07/25/2017
Humidity: 50 %
Temperature: 72 F
Sample 1 Median Thickness: 0.08 in
Sample 1 Tear Strength: 175 lbf / in
Sample 2 Median Thickness: 0.066 in
Sample 2 Tear Strength: 227.3 lbf / in
Sample 3 Median Thickness: 0.075 in
Sample 3 Tear Strength: 240 lbf / in
Sample 4 Median Thickness: 0.077 in
Sample 4 Tear Strength: 233.8 lbf / in
Sample 5 Median Thickness: 0.072 in
Sample 5 Tear Strength: 236.1 lbf / in
UTM: no data
Median of the Tear Strength Values: 233.8 lb/in
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point FileTest graph for Sample 1
Source: Partner Data Point File
Test graph for Sample 2
Source: Partner Data Point File
Test graph for Sample 3
Source: Partner Data Point File
Test graph for Sample 4
Source: Partner Data Point File
Test graph for Sample 5
Test was verified on 7/31/2017 ✔