Summary for Test 2024-07-02-26-2
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 214135 DEA: 09213404 EFIS: 0900000030 |
---|---|
DIST-CO-RTE-PM | 09-INY-395-29.9/41.8 |
Award Date | 10/22/2021 |
Closeout Date | Not set |
Work Description | ROADWAY EXCAVATION, PLACE HMA (TYPE A), AND ALTERNATIVE PIPE CULVERT. |
Location Description | INYO COUNTY NEAR OLANCHA AND CARTAGO FROM 1.4 MILES SOUTH OF LOS ANGELES AQUEDUCT BRIDGE TO 0.2 MILE SOUTH OF ASH CREEK BRIDGE |
QA Service Level | 1 (Verified on 05/03/2019) |
Sample Information
Sample Taken Date | 07/02/2024 | Sample Unique Key | 26 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/02/2024 |
Sample type | Quality Assurance | A brief description of the sample | 3/4" CF & RAP |
The quantity of what the sample constitutes | 750 Tons | From where was the sample collected | Source |
First name of sampler or witnessed by | Jerid | Last name of sampler or witnessed by | Kupelian |
Title of sampler | Consultant | Telephone number of sampler | |
Laboratory sample identification | CF-R164 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Fisher Sand & Gravel Olancha | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 00-00-0000 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Sample Device at Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Combined Gradation Report Information
Combined Gradation Report Id | Bin Index | Dime Test Id |
---|---|---|
2024-07-11: HMA Aggregates (Size 3/4"): Type A HMA - Continuous Mixing Plant - Sieve Analysis With RAP | 1 | 2024-07-02-26-2 |
Test Details
DIME Sample ID: 2024-07-02-26
DIME Test ID: 2024-07-02-26-2
Testing Lab: CT D09 - Bishop Field Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-07-08
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Calculated
Tester's full name: Jerid Kupelian
Date of test: 07/02/2024
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 92.4 %
Cumulative percent passing the 1/2 in. sieve: 75 %
Cumulative percent passing the 3/8 in. sieve: 64.1 %
Cumulative percent passing the #4 sieve: 34.6 %
Cumulative percent passing the #8 sieve: 23.9 %
Cumulative percent passing the #16 sieve: 18 %
Cumulative percent passing the #30 sieve: 13.3 %
Cumulative percent passing the #50 sieve: 9.2 %
Cumulative percent passing the #100 sieve: 6 %
Cumulative percent passing the #200 sieve: 3.9 %
General comments (publicly viewable) (Max 1000 characters): CF-R164 Coldfeed
Test was verified on 7/8/2024 ✔