Summary for Test 2024-05-23-91-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 995482 DEA: 112T36U4 EFIS: 1122000243 |
---|---|
DIST-CO-RTE-PM | 11-SD-5-37.4-52.6 |
Award Date | 10/20/2023 |
Closeout Date | Not set |
Work Description | I-5 NCC SEGMENT 4C |
Location Description | I-5 in San Diego County at Various Locations from Lomas Santa Fe Drive Undercrossing to 0.2 Mile North of Oceanside Undercrossing |
QA Service Level | 1 (Verified on 11/20/2023) |
Sample Information
Sample Taken Date | 05/23/2024 | Sample Unique Key | 91 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/25/2024 |
Sample type | Quality Assurance | A brief description of the sample | PSU |
The quantity of what the sample constitutes | 3 bags | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Ben | Last name of sampler or witnessed by | Smith |
Title of sampler | Telephone number of sampler | 6193804522 | |
Laboratory sample identification | 0604-PSU | Linked DIME Sample ID | 2024-05-23-90 |
The fabricator/manufacturer/facility name | Vulcan Caroll Canyon | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0035 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2024-05-23-91
DIME Test ID: 2024-05-23-91-1
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2024-07-15
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Mohammad Abbassi
Date of test: 07/02/2024
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
8084 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
378.0 grams | 95 % | |||||
1741.0 grams | 78 % | |||||
2874.0 grams | 64 % | |||||
4659.0 grams | 42 % | |||||
653.2 grams | ||||||
177.7 grams | 31 % | |||||
344.7 grams | 20 % | |||||
467.3 grams | 12 % | |||||
569.4 grams | 5 % | |||||
624.5 grams | 2 % | |||||
650.6 grams | 0.2 % | |||||
653.5 grams |
General comments (publicly viewable) (Max 1000 characters): complies
Test was verified on 7/15/2024 ✔