Summary for Test 2024-05-10-33-5
Test performed: CTM 673-July 2012Project Information
Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 05/10/2024 | Sample Unique Key | 33 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/15/2024 |
Sample type | Quality Assurance | A brief description of the sample | 2.75" Joint Seal |
The quantity of what the sample constitutes | 500' | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Watson Bowman Acme | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 0124214 |
---|---|---|---|
Manufacturer(s) | Watson Bowman Acme | Temperature | 72 |
Humidity | 50 | Comments | |
Joint Seal Size | 2.75 |
Test Details
DIME Sample ID: 2024-05-10-33
DIME Test ID: 2024-05-10-33-5
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2024-07-24
Test Results
Input Type: Measured
Tester's full name: aauvinen
Date of test: 06/28/2024
UTM: 56kip
Temperature: 72.00 f
Humidity: 50.00 %
Load at W1: no data
Width at 4 x Load at W1: no data
Nominal Width: 2.75 in
Measured Maximum Uncompressed Width: 2.927 in
Measured Minimum Uncompressed Width: 2.84 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 2.876 in
Height of Contact Face: 2.858 in
Length: 5 in
Spec Minimum Uncompressed Width: no data
Area (5 Times of the Height of Contact Face): 14.29 sqin
Half of the Spec Minimum Uncompressed Width: no data
85 Percent of the Spec Minimum Uncompressed Width: 2.858 in
3 Times of the Area: no data
4 Times of the Load at W1: no data
W1 (US Units): 2.4446 in
W1 (Metric Units): 62.0928 millimeters
W2 (US Units): 1.2154 in
W2 (Metric Units): 30.8707 millimeters
Satisfactory of MR of (US Units): 1.2292 in
Satisfactory of MR of (Metric Units): 31.2221 millimeters
Optional W1 Measurement 1: no data
Optional W1 Measurement 2: no data
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Bluehill Data Point FileTest graph for 2024-05-10-33-5
Test was verified on 7/24/2024 ✔