Summary for Test 2024-04-22-63-3

Test performed: AASHTO T315-22

Project Information

Project IdentifiersProject ID: 44444
DEA: ASCP
EFIS: ASCP
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for submitting Sample information for Asphalt Supplier Certification Program.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date04/22/2024 Sample Unique Key63
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/03/2024
Sample typeVerification A brief description of the sampleIn-line Blend
The quantity of what the sample constitutes1 of 1 From where was the sample collectedManufacturer
First name of sampler or witnessed byAnn Last name of sampler or witnessed byHamer
Title of sampler Telephone number of sampler
Laboratory sample identification042224-6428M-001 Linked DIME Sample ID2024-04-22-50
The fabricator/manufacturer/facility nameCasa Grande, AZ Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-28 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierWright Asphalt Products Co. - Casa Grande AZ MultigradeNo
Multigrade Type Asphalt Binder Mix Number

Test Details

DIME Sample ID: 2024-04-22-63
DIME Test ID: 2024-04-22-63-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2024-05-08

Test Results


Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Raul Cardenas
Date of test: 05/07/2024
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.407 kPa
Phase Angle (δ) (for the 10 cycles): 66.0 degree
Complex Modulus (G*) (for the 10 measurements): 4.054 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 4.44 kPa
Stress Amplitude 2: 0.232 kPa
Phase Angle 2 (δ) (for the 10 cycles): 67.0 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 2.311 kPa
Test Temperature (Specimen 2): 70.0 C
Dynamic Shear 2, G*/sin(δ): 2.51 kPa
Delta at 2.2 kpa: 67.2 degree
General comments (publicly viewable) (Max 1000 characters): RTFO+6

Test was verified on 5/8/2024