Summary for Test 2017-04-20-6-7
Test performed: ASTM A370-15Project Information
Project Identifiers | Project ID: 8196 DEA: 59912684 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | |
Location Description | |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 04/20/2017 | Sample Unique Key | 6 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/26/2017 |
Sample type | Quality Assurance | A brief description of the sample | F1554 Anchor Rods Nut Washers |
The quantity of what the sample constitutes | 52 | From where was the sample collected | Distributor |
First name of sampler or witnessed by | Daniel | Last name of sampler or witnessed by | Reyes |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | A M Bolt | Transportation Laboratory (TL) Number | NA |
Inspector Lot Number from the Transportation Laboratory (TL) Form | B30111117 | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
---|---|---|---|
Heat Number(s) | 3064243, 3062708, 5802878703, 3066882, 3065470, 3066144 | Nut Mfg. Lot Number(s) | 71702637, NF15202091 11, 71764139, 383997A, DDTO |
Washer Mfg. Lot Number(s) | 299014, 298470, 297626, 299482, 299272, 299997 | Bolt Specification | F1554 |
Bolt Length(s) | 42, 42, 42, 36, 36, 42 | Nut Specification | A194/A563, A194, DH, 2H |
Washer Specification | F436 | Finish | F2329 |
Diameter/Size | 2.5, 1.25, 2.25, 1, 1, 1.5 | Bolt Mfg. Lot Number | |
Rocap Test Requirement(s) | Lubricant Requirements(s) |
Test Details
DIME Sample ID: 2017-04-20-6
DIME Test ID: 2017-04-20-6-7
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2017-05-09
Test Results
Number of Samples: 12
Input Type: Calculated
Tester's full name: Fred
Date of test: 05/01/2017
UTM: 67KIP
Temperature: 72 F
Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
---|---|---|---|---|---|---|---|---|
1 | 3064243 | 0.493 | 0.1909 | 66687 | 97130 | 25.7 | Fred | |
2 | 3065470 | 0.496 | 0.1932 | 65906 | 91110 | 29 | Fred | |
3 | 3066144 | 0.496 | 0.1932 | 62753 | 87900 | 28.9 | Fred | |
4 | 3066144 | 0.494 | 0.1917 | 63307 | 88030 | 29.5 | Fred | |
5 | 3064243 | 0.495 | 0.1924 | 67243 | 96340 | 25.2 | Fred | |
6 | 3062708 | 0.497 | 0.194 | 66418 | 89530 | 29.1 | Fred | |
7 | 3062708 | 0.497 | 0.194 | 65755 | 89210 | 29.1 | Fred | |
8 | 5802878703 | 0.496 | 0.1932 | 66124 | 88670 | 28.8 | Fred | |
9 | 5802878703 | 0.496 | 0.1932 | 67270 | 90130 | 28.2 | Fred | |
10 | 3066882 | 0.497 | 0.194 | 67375 | 93410 | 28.3 | Fred | |
11 | 3066882 | 0.497 | 0.194 | 68053 | 93370 | 28.1 | Fred | |
12 | 3065470 | 0.497 | 0.194 | 65932 | 90840 | 29 | Fred |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 5/2/2017 ✔