Summary for Test 2023-10-03-94-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 215336 DEA: 051G9804 EFIS: 0516000009 |
---|---|
DIST-CO-RTE-PM | 05-SLO-1-10.0/16.8 |
Award Date | 12/19/2022 |
Closeout Date | Not set |
Work Description | RHMA (GAP GRADED), RETAINING WALL, CURB RAMPS AND LIGHTING SYSTEMS. |
Location Description | SAN LUIS OBISPO COUNTY FROM GRACIA WAY AT OCEANO TO ROUTE 1/101 SEPARATION IN PISMO BEACH. |
QA Service Level | 1 (Verified on 11/18/2020) |
Sample Information
Sample Taken Date | 10/03/2023 | Sample Unique Key | 94 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/03/2023 |
Sample type | Quality Assurance | A brief description of the sample | 3/4" RHMA-G |
The quantity of what the sample constitutes | Up to 750 Tons | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Isaac | Last name of sampler or witnessed by | Gleffe |
Title of sampler | ARET | Telephone number of sampler | 18053191237 |
Laboratory sample identification | 231003A | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Calportland-Garey | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | 1 | Structure unique identifier | |
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-42-0014 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | .75in coldfeed | The fabricator/manufacturer designation for the sample | L1SL5 |
The plant number | Calportland Garey | A detailed description of where the material sample was collected | Belt Discharge |
Where the material sample would have been placed if not sampled | HWY 1 Pismo Beach | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Lot number | 1 | |
Sublot number | 5 | Aggregate Mix Number | D1215H530 |
Test Details
DIME Sample ID: 2023-10-03-94
DIME Test ID: 2023-10-03-94-1
Testing Lab: CT D05 - Santa Maria Field Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-11-17
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Calculated
Tester's full name: Isaac Gleffe
Date of test: 10/03/2023
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 97 %
Cumulative percent passing the 1/2 in. sieve: 85 %
Cumulative percent passing the 3/8 in. sieve: 66 %
Cumulative percent passing the #4 sieve: 34 %
Cumulative percent passing the #8 sieve: 65.4 %
Cumulative percent passing the #16 sieve: 48.6 %
Cumulative percent passing the #30 sieve: 35.5 %
Cumulative percent passing the #50 sieve: 22.9 %
Cumulative percent passing the #100 sieve: 13.4 %
Cumulative percent passing the #200 sieve: 8.5 %
General comments (publicly viewable) (Max 1000 characters): L1SL05 Gradation.
Test was verified on 11/17/2023 ✔