Summary for Test 2017-03-14-4-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 88888
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set

Sample Information

Sample Taken Date03/14/2017 Sample Unique Key4
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/15/2017
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes1 From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberNA
Inspector Lot Number from the Transportation Laboratory (TL) FormN/A Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0617167
Manufacturer(s)Watson Bowman Temperature72
Humidity45 CommentsUnknown
Joint Seal Size3.75

Test Details

DIME Sample ID: 2017-03-14-4
DIME Test ID: 2017-03-14-4-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-04-10

Test Results

Input Type: Measured
Tester's full name: Fred
Date of test: 03/21/2017
Temperature: 72 ?F
Humidity: 52 %
Load at W1: 54.0563 lbs
Width at 4 x Load at W1: 1.57369 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.978 in
Measured Minimum Uncompressed Width: 3.8525 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.9 in
Height of Contact Face: 3.861 in
Spec Minimum Uncompressed Width: 3.8525 in
Area (5 Times of the Height of Contact Face): 19.305 sqin
Half of the Spec Minimum Uncompressed Width: 1.95 in
85 Percent of the Spec Minimum Uncompressed Width: 3.27463 in
3 Times of the Area: 57.915 sqin
4 Times of the Load at W1: 216.225 in
W1 (US Units):3.275 in
W1 (Metric Units):83.175 millimeters
W2 (US Units):1.574 in
W2 (Metric Units):39.972 millimeters
Satisfactory of MR of (US Units):1.701 in
Satisfactory of MR of (Metric Units):43.204 millimeters
Optional W1 Measurement 1:3.2746 in
Optional W1 Measurement 2:58.3011 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point File
Test graph for 2017-03-14-4-1

Test was verified on 4/3/2017