DIME - Test Summary

Summary for Test 2023-06-14-46-6

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 215666 DEA: 11430564 EFIS: 1119000015
DIST-CO-RTE-PM	11-SD-67-R6.0/24.4
Award Date	03/01/2022
Closeout Date	11/04/2024
Work Description	COLD PLANE, RHMA OVERLAY AND HFST, AND INSTALL CHANNELIZERS.
Location Description	SAN DIEGO COUNTY NEAR LAKESIDE AND RAMONA FROM 0.2 MILE NORTH OF SAN DIEGO RIVER BRIDGE TO ROUTE 78
QA Service Level	1 (Verified on 07/06/2021)

Sample Taken Date	06/14/2023	Sample Unique Key	46
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/15/2023
Sample type	Quality Assurance	A brief description of the sample	1/2" HMA-A
The quantity of what the sample constitutes	12 boxes 3 bags	From where was the sample collected	Supplier
First name of sampler or witnessed by	Chris	Last name of sampler or witnessed by	Lawless
Title of sampler		Telephone number of sampler
Laboratory sample identification	7207-JMFR	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Martin Marietta Lakeside	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-37-0036
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2023-06-14-46

DIME Test ID: 2023-06-14-46-6

Testing Lab: CT D11 - District 11 Materials Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-07-11

Input Type: Measured

Tester's full name: Melchor Oronoz

Date of test: 06/22/2023

Mass of saturated surface dry sample (before pycnometer) (S): 502.7 grams

Mass of the pycnometer with water and aggregate (C): 989.1 grams

Mass of the pycnometer with water (B): 679.2 grams

Mass of the oven dried sample (before pycnometer) (A): 494.5 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500.6 grams

Mass of the oven dry aggregate (for absorption) (A): 495.4 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.565

Bulk specific gravity (SSD Basis): 2.607

Apparent specific gravity: 2.679

Absorption: 1.7 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/11/2023 ✔