Summary for Test 2023-06-14-46-12
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 215666 DEA: 11430564 EFIS: 1119000015 |
---|---|
DIST-CO-RTE-PM | 11-SD-67-R6.0/24.4 |
Award Date | 03/01/2022 |
Closeout Date | 11/04/2024 |
Work Description | COLD PLANE, RHMA OVERLAY AND HFST, AND INSTALL CHANNELIZERS. |
Location Description | SAN DIEGO COUNTY NEAR LAKESIDE AND RAMONA FROM 0.2 MILE NORTH OF SAN DIEGO RIVER BRIDGE TO ROUTE 78 |
QA Service Level | 1 (Verified on 07/06/2021) |
Sample Information
Sample Taken Date | 06/14/2023 | Sample Unique Key | 46 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/15/2023 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" HMA-A |
The quantity of what the sample constitutes | 12 boxes 3 bags | From where was the sample collected | Supplier |
First name of sampler or witnessed by | Chris | Last name of sampler or witnessed by | Lawless |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 7207-JMFR | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Martin Marietta Lakeside | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0036 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2023-06-14-46
DIME Test ID: 2023-06-14-46-12
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2023-07-11
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: Yes
Input Type: Measured
Tester's full name: Melchor Oronoz
Date of test: 06/22/2023
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2,785.0 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
159.0 grams | 94 % | |||||
529.0 grams | 81 % | |||||
1,141.0 grams | 59 % | |||||
507.5 grams | ||||||
122.1 grams | 45 % | |||||
255.8 grams | 29 % | |||||
351.8 grams | 18 % | |||||
411.1 grams | 11 % | |||||
444.3 grams | 7 % | |||||
452.4 grams | 6.4 % | |||||
454.5 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/11/2023 ✔