DIME - Test Summary

Summary for Test 2022-11-28-18-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 211260 DEA: 072159U4 EFIS: 0715000160
DIST-CO-RTE-PM	07-LA,ORA-5-0.0/1.5, 44.3/44.4
Award Date	05/27/2016
Closeout Date	08/01/2023
Work Description	CONSTRUCT HOV LANES AND MIX FLOW LANES.
Location Description	LOS ANGELES AND ORANGE COUNTIES IN BUENA PARK, LA MIRADA, CERRITOS AND SANTA FE SPRINGS FROM ARTESIA BOULEVARD UNDERCROSSING TO NORTH FORK COYOTE CREEK
QA Service Level	1 (Verified on 03/16/2016)

Sample Taken Date	11/28/2022	Sample Unique Key	18
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	11/30/2022
Sample type	Verification	A brief description of the sample	3/4" HMA-A-SP R21 0.5% LAS
The quantity of what the sample constitutes	4 Bags Combined Agg	From where was the sample collected	Job Site
First name of sampler or witnessed by	Victor	Last name of sampler or witnessed by	Pham
Title of sampler		Telephone number of sampler
Laboratory sample identification	0761A-22	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Vulcan Materials Irwindale	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-19-0035
The fabricator's/manufacturer's product name for the sample	Fish Canyon - Irwindale	The fabricator/manufacturer designation for the sample	Vulcan Irwindale
The plant number		A detailed description of where the material sample was collected	Belt Cut at Vulcan Irwindale Plant
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	220817A IRW SJR	Lot number
Sublot number		Aggregate Mix Number

DIME Sample ID: 2022-11-28-18

DIME Test ID: 2022-11-28-18-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2023-01-06

Input Type: Measured

Tester's full name: Robert Jarquin

Date of test: 12/02/2022

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 970.7 grams

Mass of the pycnometer with water (B): 660.4 grams

Mass of the oven dried sample (before pycnometer) (A): 487.2 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 487.2 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.568

Bulk specific gravity (SSD Basis): 2.636

Apparent specific gravity: 2.754

Absorption: 2.6 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 1/6/2023 ✔