Summary for Test 2022-10-21-38-6
Test performed: CTM 389-19Project Information
Project Identifiers | Project ID: 214666 DEA: 022H8104 EFIS: 0217000012 |
---|---|
DIST-CO-RTE-PM | 02-TRI-299-1.67/45.12 |
Award Date | 03/03/2022 |
Closeout Date | 08/11/2023 |
Work Description | TRINITY CULVERTS |
Location Description | CULVERT REHABILITATION IN TRINITY COUNTY NEAR SALYER AT VARIOUS LOCATIONS FROM 0.1 MILE WEST OF WHITE HOUSE GULCH ROAD TO 0.4 MILE WEST OF SLATTERY POND ROAD. |
QA Service Level | 1 (Verified on 03/02/2020) |
Sample Information
Sample Taken Date | 10/21/2022 | Sample Unique Key | 38 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/21/2022 |
Sample type | Acceptance | A brief description of the sample | 16 boxes of Lime Treated 3/4-inch Type A HMA (eq. PG 64-28 M) with 24.0% RAP and virgin PG 58-34 M from Valero (Benicia, CA) |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | JD | Last name of sampler or witnessed by | Atkinson |
Title of sampler | Consultant | Telephone number of sampler | |
Laboratory sample identification | D79176 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Tullis – Northstate Asphalt (Redding, CA) | Transportation Laboratory (TL) Number | 858105 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
---|---|---|---|
HMA Grading | 3/4 inch | Lot number | |
Sublot number | HMA Mix Number |
Test Details
DIME Sample ID: 2022-10-21-38
DIME Test ID: 2022-10-21-38-6
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix Asphalt
Test Release Date: 2022-10-31
Test Results
Specified number of passes at 12.7 mm: 15000
Input Type: Measured
Tester's full name: Colt Sweeny
Date of test: 10/27/2022
Test Temperature: 122 F
HMA Production: Field Plant Produced
Compaction Method: SGC Cylindrical Specimen
Type and Amount of Anti-Stripping Additive: 1.0% Lime
Stripping Inflection Point (Wheel A): >15000
Stripping Inflection Point (Wheel B): >15000
Maximum impression at 5000 passes (left wheel): 1.2 mm
Maximum impression at 5000 passes (right wheel): 1.44 mm
Average impression at 5000 passes (left/right avg): 1.32 mm
Maximum impression at 10000 passes (left wheel): 1.51 mm
Maximum impression at 10000 passes (right wheel): 1.68 mm
Average impression at 10000 passes (left/right avg): 1.6 mm
Maximum impression at 15000 passes (left wheel): 1.63 mm
Maximum impression at 15000 passes (right wheel): 1.74 mm
Average impression at 15000 passes (left/right avg): 1.69 mm
Maximum impression at 20000 passes (left wheel): no data
Maximum impression at 20000 passes (right wheel): no data
Average impression at 20000 passes (left/right avg): no data
Maximum impression at 25000 passes (left wheel): no data
Maximum impression at 25000 passes (right wheel): no data
Average impression at 25000 passes (left/right avg): no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/31/2022 ✔