Summary for Test 2022-08-01-45-1
Test performed: CTM 202-November 2011
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.
Please click this
link
to view the corrected test.
Project Information
| Project Identifiers | Project ID: 993468 DEA: 010C1104 EFIS: 0112000229 |
|---|---|
| DIST-CO-RTE-PM | 01-HUM-101-60.4 |
| Award Date | 03/17/2022 |
| Closeout Date | Not set |
| Work Description | Construct New Materials Lab |
| Location Description | HUMBOLDT COUNTY IN FORTUNA AT THE MATERIALS LABORATORY AT 1050 RIVER RANCH ROAD |
| QA Service Level | 1 (Verified on 12/28/2021) |
Sample Information
| Sample Taken Date | 08/01/2022 | Sample Unique Key | 45 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/01/2022 |
| Sample type | Preliminary | A brief description of the sample | Inter Con Aggregate |
| The quantity of what the sample constitutes | Peliminary data | From where was the sample collected | Source |
| First name of sampler or witnessed by | J Thomas | Last name of sampler or witnessed by | Sauers |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 22-312 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Mercer Fraser Fortuna | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-12-0002 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Stockpile | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/8 inch | |
| The concrete mix design number | MF CL 2 Slag | Lot number | |
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2022-08-01-45
DIME Test ID: 2022-08-01-45-1
Testing Lab: CT D01 - District 1 Materials Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2022-08-10
Test Results
What size aggregate is being tested?: 0.375 in x No. 8 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Leif Ayres
Date of test: 08/04/2022
Total mass of material in the sample: 26794 grams
Cumulative mass retained on the 1/2 in. sieve: 0 grams
Cumulative mass retained on the 3/8 in. sieve: 121 grams
Cumulative mass retained on the #4 sieve: 2683 grams
Cumulative mass retained on the #8 sieve: 26494 grams
Cumulative mass retained on the pan: 26794 grams
Cumulative percent passing the 1/2 in. sieve: 100 %
Cumulative percent passing the 3/8 in. sieve: 100 %
Cumulative percent passing the #4 sieve: 90 %
Cumulative percent passing the #8 sieve: 1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/10/2022 ✔
Warning: The test results shown on this page have been superseded and are invalid.
This information is for reference only.