Summary for Test 2016-06-21-8-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 8196
DEA: 59912684
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work Description
Location Description
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date06/21/2016 Sample Unique Key8
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/23/2016
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes600ft From where was the sample collectedSource
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)1116266
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size5.00

Test Details

DIME Sample ID: 2016-06-21-8
DIME Test ID: 2016-06-21-8-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2016-07-11

Test Results


Input Type: Measured
Tester's full name: Brian
Date of test: 06/28/2016
UTM: 2KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 76.6322 lbs
Width at 4 x Load at W1: 2.0942 in
Nominal Width: 5 in
Measured Maximum Uncompressed Width: 5.1625 in
Measured Minimum Uncompressed Width: 5.0285 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 5.065 in
Height of Contact Face: 0 in
Length: no data
Spec Minimum Uncompressed Width: 5.0285 in
Area (5 Times of the Height of Contact Face): 0 sqin
Half of the Spec Minimum Uncompressed Width: 2.5325 in
85 Percent of the Spec Minimum Uncompressed Width: 4.27423 in
3 Times of the Area: 0 sqin
4 Times of the Load at W1: 306.529 in
W1 (US Units): 4.274 in
W1 (Metric Units): 108.565 millimeters
W2 (US Units): 2.094 in
W2 (Metric Units): 53.193 millimeters
Satisfactory of MR of (US Units): 2.18 in
Satisfactory of MR of (Metric Units): 55.373 millimeters
Optional W1 Measurement 1: 4.2742 in
Optional W1 Measurement 2: 0 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 7/11/2016