Summary for Test 2022-03-17-25-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 03/17/2022 | Sample Unique Key | 25 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/21/2022 |
Sample type | Verification | A brief description of the sample | Combined Untreated Virgin Aggregate for use in 3/4-inch Type A HMA |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | D79009F | Linked DIME Sample ID | 2022-03-17-22, 2022-03-17-23, 2022-03-17-24 |
The fabricator/manufacturer/facility name | Tullis – Northstate Asphalt (Redding, CA) | Transportation Laboratory (TL) Number | 708110 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0057::Shasta Ranch Aggregates |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Lab-Batched from Sized Untreated Aggregate Stockpiles | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | JMF 22-01-S01 | Lot number | |
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2022-03-17-25
DIME Test ID: 2022-03-17-25-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2022-05-12
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Darrell Valasek
Date of test: 03/28/2022
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 99.8 %
Cumulative percent passing the 3/4 in. sieve: 99.8 %
Cumulative percent passing the 1/2 in. sieve: 88.8 %
Cumulative percent passing the 3/8 in. sieve: 63.5 %
Cumulative percent passing the 1/4 in. sieve: 42.5 %
Cumulative percent passing the #4 sieve: 35.9 %
Cumulative percent passing the #8 sieve: 23.7 %
Cumulative percent passing the #16 sieve: 15.8 %
Cumulative percent passing the #30 sieve: 11.1 %
Cumulative percent passing the #50 sieve: 7.7 %
Cumulative percent passing the #100 sieve: 5.6 %
Cumulative percent passing the #200 sieve: 4.32 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/12/2022 ✔