Summary for Test 2021-11-22-5-1

Test performed: ASTM F606-21

Project Information

Project IdentifiersProject ID: 213568
DEA: 034H6904
EFIS: 03190000026
DIST-CO-RTE-PM03-SAC,SAC/SOL-12-0-0.4/ 26.3-26.4, 0.0-0.4/26.3-26.4
Award DateNot set
Closeout DateNot set
Work DescriptionMajor Damage Restoration (Emergency Opening)
Location DescriptionNot set
QA Service Level1 (Verified on 08/24/2018)

Sample Information

Sample Taken Date11/22/2021 Sample Unique Key5
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/03/2021
Sample typeQuality Assurance A brief description of the sampleF1554 Grade 55 HDG Anchor Bolts
The quantity of what the sample constitutes44ea 5/8" x 14"; 24ea 3/4" x 14"; 80 ea 1" x 18"; 92 ea 1" x 17" From where was the sample collectedFabricator
First name of sampler or witnessed byGreg Last name of sampler or witnessed byThompson
Title of samplerAssociate Steel Inspector Telephone number of sampler510-376-7155
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameXKT Engineering Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) FormB9-131-21 Structure unique identifier
Structure name

Material Information

Material TypeSMTL TM3 - Fastener Assembly Rocap Number(s)
Heat Number(s) 3800015418 3800021442 3800022774 Nut Mfg. Lot Number(s)458875B 450605C 455386A
Washer Mfg. Lot Number(s)12875 14849 D9793 Bolt SpecificationF1554 HDG
Bolt Length(s)5/8x14,3/4x14,1x17and 1x18 Nut SpecificationF563 DH
Washer SpecificationF436 type 1 FinishHDG
Diameter/Size58", 3/4", 1" Bolt Mfg. Lot Number5/8- 380001541820 3/4- 380002144220 1- 3800
Rocap Test Requirement(s)no Lubricant Requirements(s)yes

Test Details

DIME Sample ID: 2021-11-22-5
DIME Test ID: 2021-11-22-5-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-21: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2021-12-20

Test Results


Number of Samples: 1
Input Type: Measured
Tester's full name: spaine
Date of test: 12/17/2021
UTM: 400kip
Temperature: 72
NumSampleSizeArea (in^2)Peak Load (lbf)Peak Load (kN)Tensile Strength (psi)Stress at Offset (psi)Load at Offset (lbf)Comments
11AUNC 5/8 0.2262169196957467738217488F1554 Full Length Tensile

General comments (publicly viewable) (Max 1000 characters): F1554 Full Length Tensile
Test Graph
Source: Bluehill Data Point File

Test was verified on 12/20/2021