Summary for Test 2020-10-20-35-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 213469 DEA: 024C40V4 EFIS: 0218000125 |
|---|---|
| DIST-CO-RTE-PM | 02-SHA-5-R3.8/R11.7 |
| Award Date | 11/06/2018 |
| Closeout Date | 08/16/2023 |
| Work Description | WIDEN TO 6 LANES, BRIDGE REPLACEMENT AND WIDENING AND ROADWAY REHAB |
| Location Description | SHASTA COUNTY IN AND NEAR ANDERSON FROM ROUTE 5/273 SEPARATION TO 0.4 MILE SOUTH OF CHURN CREEK ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 12/31/2018) |
Sample Information
| Sample Taken Date | 10/20/2020 | Sample Unique Key | 35 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/20/2020 |
| Sample type | Verification | A brief description of the sample | Lime Treated 3/4-inch Type G Aggregate |
| The quantity of what the sample constitutes | JMF Renewal | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | D78681 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | JF Shea Construction - Fawndale Rock and Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 853473 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0017 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Cold Feed | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | JMF 19-30-R01 | Lot number | |
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-10-20-35
DIME Test ID: 2020-10-20-35-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2021-12-10
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Karen Rios Dorado and A. Mills
Date of test: 10/20/2020
Total mass of material in the sample: 6115 grams
Cumulative mass retained on the 1 1/2 in. sieve: 0 grams
Cumulative mass retained on the 1 in. sieve: 0 grams
Cumulative mass retained on the 3/4 in. sieve: 12 grams
Cumulative mass retained on the 1/2 in. sieve: 822 grams
Cumulative mass retained on the 3/8 in. sieve: 1641 grams
Cumulative mass retained on the 1/4 in. sieve: 3033 grams
Cumulative mass retained on the #4 sieve: 3901 grams
Cumulative mass retained on the #8 sieve: 260.3 grams
Cumulative mass retained on the #16 sieve: 349.5 grams
Cumulative mass retained on the #30 sieve: 393.1 grams
Cumulative mass retained on the #50 sieve: 416.4 grams
Cumulative mass retained on the #100 sieve: 432.9 grams
Cumulative mass retained on the #200 sieve: 444.2 grams
Cumulative mass retained on the pan: no data
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 99.8 %
Cumulative percent passing the 1/2 in. sieve: 86.6 %
Cumulative percent passing the 3/8 in. sieve: 73.2 %
Cumulative percent passing the 1/4 in. sieve: 50.4 %
Cumulative percent passing the #4 sieve: 36.2 %
Cumulative percent passing the #8 sieve: 17.5 %
Cumulative percent passing the #16 sieve: 11.1 %
Cumulative percent passing the #30 sieve: 7.9 %
Cumulative percent passing the #50 sieve: 6.3 %
Cumulative percent passing the #100 sieve: 5.1 %
Cumulative percent passing the #200 sieve: 4.26 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/10/2021 ✔